[pwc] New driver and Led Status

To:
Subject:	[pwc] New driver and Led Status
From:	Paul Muadib <>
Date:	Tue, 18 Apr 2006 15:49:30 +0000 (GMT)

Hello,

I successfully compiled and installed the last snapshot driver wc-v4l2-20060418-042701.tar.bz2 for my SPC900NC. I'm trying to turn off the led. However, different combinations ->

insmod /lib/modules/2.6.16.5-1kc/kernel/drivers/usb/media/pwc/pwc.ko.gz leds=0,0 or
insmod /lib/modules/2.6.16.5-1kc/kernel/drivers/usb/media/pwc/pwc.ko.gz leds=0,1

give nothing. Actually, I'm not really sure about the syntax of the parameter "leds", neither if it is applicable to the SPC900NC. Can anyone give me some indications to turn off the Led. Someone already asked that question the last month without success.

Many Thanks

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] New driver and Led Status, Paul Muadib <=

Previous by Date:	Re: [pwc] Can't compile pwc-10.0.11 or pwc-10.0.12-rc1 on FC4 2.6.16-1.2069_FC4, M Daniel R M
Next by Date:	[pwc] [PATCH] libpwc and type 675 webcam, Gert Vervoort
Previous by Thread:	[pwc] Can't compile pwc-10.0.11 or pwc-10.0.12-rc1 on FC4 2.6.16-1.2069_FC4, west suhanic
Next by Thread:	[pwc] [PATCH] libpwc and type 675 webcam, Gert Vervoort
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU