pwc
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [pwc] Can't compile pwc-10.0.11 or pwc-10.0.12-rc1 on FC4 2.6.16-1.2

from [M Daniel R M] [Permanent Link][Original]
To:
Subject: Re: [pwc] Can't compile pwc-10.0.11 or pwc-10.0.12-rc1 on FC4 2.6.16-1.2069_FC4
From: M Daniel R M <>
Date: Sun, 16 Apr 2006 23:18:45 +0200 
El sÃb, 15-04-2006 a las 12:36 -0400, west suhanic escribiÃ:
> Hello All:
>
> Cannot compile pwc-10.0.11 or pwc-10.0.12-rc1 on 2.6.16-1.2069_FC4 .
> Please note pwc-10.0.11 compiled fine under 2.6.15-1.1833_FC4. Any
> suggestions on what I did wrong?
>
> regards,
>
> west

Hi West,

the issue was treated here in this list a few days ago, more it was
solved (by Luc Saillard). So please have a look into the archives, the
answer is there.

Essentially, the solution is (copy & paste):

>   # cd /lib/modules/`uname -r`/source/
>   # make oldconfig

Then, the usual procedure..

Regards,

Daniel

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [pwc] Can't compile pwc-10.0.11 or pwc-10.0.12-rc1 on FC4 2.6.16-1.2069_FC4, west suhanic
Next by Date:  [pwc] New driver and Led Status, Paul Muadib
Previous by Thread:  [pwc] Can't compile pwc-10.0.11 or pwc-10.0.12-rc1 on FC4 2.6.16-1.2069_FC4, west suhanic
Next by Thread:  [pwc] New driver and Led Status, Paul Muadib
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU