Re: [pwc] Does the saillard pwc driver work on amd64?

To:	"Philips Webcam Linux Driver" <>
Subject:	Re: [pwc] Does the saillard pwc driver work on amd64?
From:	"Sebastian Barthelmess" <>
Date:	Thu, 9 Mar 2006 18:10:00 -0500

Like I stated, it's loading. The pwc driver loads correctly. When the ohci driver is loaded afterwards, the specific camera isn't listed in the dmesg log nor is a device node created. Please advise. Here is my log:

modprobe -v pwc
=-=-=-=-=-=-=-=-=
pwc: Philips webcam module version 10.0.11-unofficial loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new driver Philips webcam

*************** Ok this is good, now when the ohci module is loaded....

modprobe -v ohci_hcd
=-=-=-=-=-=-=-=-=-=-=-=
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:01:00.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.0: irq 161, io mem 0xfeaf9000
ohci_hcd 0000:01:00.0: resetting from state 'reset', control = 0x600
ohci_hcd 0000:01:00.0: enabling initreset quirk
ohci_hcd 0000:01:00.0: OHCI controller state
ohci_hcd 0000:01:00.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01:00.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:01:00.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:00.0: intrstatus 0x00000004 SF
ohci_hcd 0000:01:00.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:01:00.0: hcca frame #0003
ohci_hcd 0000:01: 00.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
ohci_hcd 0000:01:00.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:00.0: roothub.status 00008000 DRWE
ohci_hcd 0000:01:00.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:01:00.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:01:00.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:01:00.0: created debug files
ohci_hcd 0000:01:00.0: supports USB remote wakeup
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb2: SerialNumber: 0000:01: 00.0
usb usb2: uevent
usb usb2: device is self-powered
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: no over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:00.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:01:00.1: irq 161, io mem 0xfeafa000
ohci_hcd 0000:01:00.1: resetting from state 'reset', control = 0x600
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
ohci_hcd 0000:01:00.1: OHCI controller state
ohci_hcd 0000:01:00.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01:00.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:01:00.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:00.1: intrstatus 0x00000044 RHSC SF
ohci_hcd 0000:01:00.1: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:01:00.1: hcca frame #0003
ohci_hcd 0000:01:00.1: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
ohci_hcd 0000:01:00.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:00.1: roothub.status 00008000 DRWE
ohci_hcd 0000:01:00.1: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
ohci_hcd 0000:01:00.1: roothub.portstatus [1] 0x00010101 CSC PPS CCS
ohci_hcd 0000:01:00.1: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:01:00.1: created debug files
ohci_hcd 0000:01:00.1: supports USB remote wakeup
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb3: SerialNumber: 0000:01:00.1
usb usb3: uevent
usb usb3: device is self-powered
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: no over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:07.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
ohci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:01:07.0: irq 153, io mem 0xfeafc000
ohci_hcd 0000:01:07.0: resetting from state 'reset', control = 0x0
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
ohci_hcd 0000:01:07.0: OHCI controller state
ohci_hcd 0000:01:07.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01: 07.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:01:07.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:07.0: intrstatus 0x00000004 SF
ohci_hcd 0000:01:07.0: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:01: 07.0: hcca frame #01ff
ohci_hcd 0000:01:07.0: roothub.a ff000203 POTPGT=255 NPS NDP=3(3)
ohci_hcd 0000:01:07.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:07.0: roothub.status 00008000 DRWE
ohci_hcd 0000:01: 07.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:01:07.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:01:07.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:01:07.0: created debug files
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb4: SerialNumber: 0000:01: 07.0
usb usb4: uevent
usb usb4: device is self-powered
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: global over-current protection
hub 4-0:1.0: power on to power good time: 510ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ohci_hcd 0000:01: 00.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-1: new low speed USB device using ohci_hcd and address 2
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-1: skipped 1 descriptor after interface
usb 3-1: default language 0x0409
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: PS2/USB Browser Combo Mouse
usb 3-1: Manufacturer: Cypress Sem
usb 3-1: uevent
usb 3-1: device is bus-powered
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usbhid 3-1:1.0: usb_probe_interface
usbhid 3-1:1.0: usb_probe_interface - got id
input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input4
input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:01:00.1-1
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCShub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:01: 00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:07.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
ohci_hcd 0000:01: 07.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:01:07.1: irq 161, io mem 0xfeafd000
ohci_hcd 0000:01:07.1: resetting from state 'reset', control = 0x0
usb 3-2: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:07.1: OHCI controller state
ohci_hcd 0000:01:07.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:01:07.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:01:07.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:01:07.1: intrstatus 0x00000004 SF
ohci_hcd 0000:01:07.1: intrenable 0x8000001a MIE UE RD WDH
ohci_hcd 0000:01:07.1: hcca frame #01ff
ohci_hcd 0000:01:07.1: roothub.a ff000202 POTPGT=255 NPS NDP=2(2)
ohci_hcd 0000:01:07.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:01:07.1: roothub.status 00008000 DRWE
ohci_hcd 0000:01:07.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:01:07.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:01:07.1: created debug files
usb usb5: default language 0x0409
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.16-rc2 ohci_hcd
usb usb5: SerialNumber: 0000:01:07.1
usb usb5: uevent
usb usb5: device is self-powered
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: global over-current protection
hub 5-0:1.0: power on to power good time: 510ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: no over-current condition exists
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 3-2: device descriptor read/64, error -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 3-2: device descriptor read/64, error -110
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 3-2: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:01:00.1: urb ffff81003fd90600 path 2 ep0in 5ec20000 cc 5 --> status -110
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:01:00.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS

On 3/9/06, Lorenzo Milesi <> wrote:

I've used it some times (gentoo amd64)...

cheers
maxxer
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] Does the saillard pwc driver work on amd64?, Sebastian Barthelmess Re: [pwc] Does the saillard pwc driver work on amd64?, Lorenzo Milesi Re: [pwc] Does the saillard pwc driver work on amd64?, Sebastian Barthelmess <= Re: [pwc] Does the saillard pwc driver work on amd64?, Lorenzo Milesi Re: [pwc] Does the saillard pwc driver work on amd64?, Luc Saillard Re: [pwc] Does the saillard pwc driver work on amd64?, Sebastian Barthelmess Re: [pwc] Does the saillard pwc driver work on amd64?, matthieu castet Re: [pwc] Does the saillard pwc driver work on amd64?, Alan Brown Re: [pwc] Does the saillard pwc driver work on amd64?, Alan Brown [pwc] Does the saillard pwc driver work on amd64?, Sebastian Barthelmess

Previous by Date:	Re: [pwc] Does the saillard pwc driver work on amd64?, Lorenzo Milesi
Next by Date:	Re: [pwc] Does the saillard pwc driver work on amd64?, Lorenzo Milesi
Previous by Thread:	Re: [pwc] Does the saillard pwc driver work on amd64?, Lorenzo Milesi
Next by Thread:	Re: [pwc] Does the saillard pwc driver work on amd64?, Lorenzo Milesi
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU