pwc
[Top] [All Lists]

[pwc] Does the saillard pwc driver work on amd64?

To:
Subject: [pwc] Does the saillard pwc driver work on amd64?
From: "Sebastian Barthelmess" <>
Date: Thu, 9 Mar 2006 12:37:05 -0500
Actually, it doesn't work perfectly.  I have a 2.6.16mm kernel
(also tried with 2.6.12, 2.6.13 and 2.6.15 kernels) with the pwc 10.0.11 driver compiled from source.  It's on a Tyan motherboard which uses the OHCI USB driver.  The driver loads correctly, but no specific camera is recognized and no device node is created.  I have two cameras, and this happens with both of them.  For fun I tried adding a USB2 Asus PCI card (can use either the EHCI or UHCI driver) and disabled the USB on the motherboard.  Exact same problem!  Driver loads perfectly, but no camera detected and no device node created.  I have tons of other computers kicking around and it works on all of them (with the same kernel versions).  I have one other 64-bit AMD that I am going to try it on now, I'll let you know what happens.

-Sebastian Barthelmess
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU