[pwc] pwc and logitech orbit mp

[Eric Prescott <>]

I'm trying to get my logitech orbit mp camera to work on fedora 4 x86_64

currently no luck. I have installed the latest pwc module but I get this 
from dmesg (See below)

When I plug the camera in I get the following
Nov 21 18:49:22 daneel kernel: usb 1-3.3: new high speed USB device using 
ehci_hcd and address 8
Nov 21 18:49:23 daneel kernel: 8:3:1: cannot set freq 0 to ep 0x86
Nov 21 18:49:24 daneel kernel: 8:3:2: cannot set freq 0 to ep 0x86
Nov 21 18:49:25 daneel kernel: 8:3:3: cannot set freq 16000 to ep 0x86

Anyone have any ideas why this is not being detected by the driver?
I notice that /dev/video0 is not created at all.

The camera does work. It has been tested under windows xp.

Any thoughts at all would be helpfull.
-Eric
=============== Dmsg snip ==================



Linux video capture interface: v1.00
pwc Philips webcam module version 10.0.6-unofficial loaded.
pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 
& PCVC
830/840.
pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung 
MPC-C10 a
nd MPC-C30,
pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite 
VCS-UC300 and
VCS-UM100.
pwc Trace options: 0x00a1
usbcore: registered new driver Philips webcam
usb 1-3.4: USB disconnect, address 5
usb 1-3.3: new high speed USB device using ehci_hcd and address 6
6:3:1: cannot set freq 0 to ep 0x86
6:3:2: cannot set freq 0 to ep 0x86
6:3:3: cannot set freq 16000 to ep 0x86
pwc Deregistering driver.
usbcore: deregistering driver Philips webcam
pwc Philips webcam module removed.
pwc Philips webcam module version 10.0.9-unofficial loaded.
pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 
& PCVC
830/840.
pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung 
MPC-C10 a
nd MPC-C30,
pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite 
VCS-UC300 and
VCS-UM100.
pwc Trace options: 0x00a1
usbcore: registered new driver Philips webcam
usb 1-3.3: USB disconnect, address 6
usb 1-3.3: new high speed USB device using ehci_hcd and address 7
7:3:1: cannot set freq 0 to ep 0x86
7:3:2: cannot set freq 0 to ep 0x86
7:3:3: cannot set freq 16000 to ep 0x86
usb 1-3.3: USB disconnect, address 7
usb 1-3.3: new high speed USB device using ehci_hcd and address 8
8:3:1: cannot set freq 0 to ep 0x86
8:3:2: cannot set freq 0 to ep 0x86
8:3:3: cannot set freq 16000 to ep 0x86


_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc