Hi folks,
I've just installed pwc module for the first time on my computer, and I
experienced same troubles this thread was about:
FATAL: Error inserting pwc
(/lib/modules/2.6.11-1-k7/kernel/drivers/usb/media/pwc.ko): Invalid
module format
I googled to this thread, but it was not very helpful :). However, by a
pretty sheer of luck, I have found the source of the problem quickly, so
I decided to write it here for other desperates.
The problem was, that gcc used to compile the module was of different
version than gcc used to build debian kernel image (4.0 versus 3.3).
After changing gcc symlink back to gcc-3.3, everything worked fine.
regards, Zbynek
> I'm kinda stumped at this point. Did you do a 'make clean' before
> building the module again?
>
> While, this shouldn't matter, maybe you could uninstall all the kernel
> RPMs you listed below except for the one you'r erunning?
>
> The only difference between my system and yours is that mine isn't
> SMP, so i'm not using the SMP kernel. But other than that, i can't
> see any difference.
>
> On 7/13/05, buzz lightyear <buzzheavyyear at hotmail.com> wrote:
> > >What do you get from running 'rpm -qa | grep kernel' ?
> >
> > kernel-2.6.12-1.1390_FC4
> > kernel-2.6.11-1.1369_FC4
> > kernel-smp-2.6.11-1.1369_FC4
> > kernel-smp-2.6.12-1.1390_FC4
> > kernel-devel-2.6.12-1.1390_FC4
_______________________________________________
pwc mailing list
http://lists.saillard.org/mailman/listinfo/pwc
|