[pwc] Philips SPC 200NC

To:
Subject:	[pwc] Philips SPC 200NC
From:	Sergio Martí Forés <>
Date:	Sun, 21 Aug 2005 21:48:00 +0200

Hi!,

i bought this philips webcam a few weeks ago, and found that is not supported by
the pwc module...

the /proc/bus/usb/devices shows something like that:

P:  Vendor=0471 ProdID=0325 Rev= 1.00
S:  Manufacturer=Philips
S:  Product=SPC 200NC

and the winxp .inf file suggests:

[VM.NT]
%USB\VID_0AC8&PID_0302.DeviceDesc%=VM.USBDCam302.XP,USB\VID_0471&PID_0326
%USB\VID_0AC8&PID_0302.DeviceDesc%=VM.USBDCam302.XP,USB\VID_0471&PID_0325

is this a 0x302 based webcam??
if so, could be possible to extend the module in the future to support this
model?? (i've playing around with the module source, but just got hangs...)

many thanks...

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] Philips SPC 200NC, Sergio Martí Forés <=

Previous by Date:	Re: [pwc] pwc pwc_isoc_handler() called with status -84, sepp . heid
Next by Date:	[pwc] a couple of bugs, Jeff Sadowski
Previous by Thread:	[pwc] pwc pwc_isoc_handler() called with status -84, sepp . heid
Next by Thread:	[pwc] a couple of bugs, Jeff Sadowski
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU