Subject: | External Power Supply for Sound Device 702 |
---|---|
From: | "David Secomb" dsecomb2 |
Date: | Fri Aug 16, 2019 12:02 am ((PDT)) |
Hi I recently purchased a Sound Device 702. I would like to record at times up to 18 hour running 2 mics using phantom. I understand the 702 can be powere= d by an external battery using the Hirose connection. I'm sure it's possible to make a cable but is there a commercial cable available to connect to a suitable battery? What size battery is needed? Does the battery need to power the recorder at Message: 7. Subject: 2v (as the power pack) or 12v ( as alternate power supply at home- 240v). My understanding is the Hirose connector has 4 pins. 2 powers the unit, the other 2 supply power to power pack. Having all 4 pins wired would power bot= h recorder and power pack, requiring 12v. Wiring to correct 2 pins just to ru= n the recorder requires 7.2v. Any advise would much be appreciated. Cheers David |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Tascam DR-680 yes/no?, mmyers |
---|---|
Next by Date: | Re: External Power Supply for Sound Device 702, dan@dandugan.com |
Previous by Thread: | Re: Tascam DR-680 yes/no?, eangman2000 |
Next by Thread: | Re: External Power Supply for Sound Device 702, dan@dandugan.com |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU