| Subject: | Re: Tascam DR680 - Getting "System Rom Error" frozen boot screen |
|---|---|
| From: | "H=E5kan Olsson" nordicsounds |
| Date: | Sun Feb 16, 2014 2:07 am ((PST)) |
Hi! Have you tried to format the SD card in the computer before putting it in DR680? Also try another SD card. Also try to remove all batteries and run it on wall-power and see if the problem is still there. I had the same problem when it was new and I think it was the SD card that was the problem, but I'm not sure. The problem went away and I have never seen it again... -- /* H=E5kan */ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Tascam DR680 - Getting "System Rom Error" frozen boot screen, ryanlogtenberg |
|---|---|
| Next by Date: | battery packs, Gianni Pavan |
| Previous by Thread: | Tascam DR680 - Getting "System Rom Error" frozen boot screen, ryanlogtenberg |
| Next by Thread: | battery packs, Gianni Pavan |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU