naturerecordists
[Top] [All Lists]

4. Re: iRig pre

Subject: 4. Re: iRig pre
From: "" richard.ho=
cks
Date: Thu Jan 3, 2013 12:31 am ((PST))

U=0D
Sent from my BlackBerry=AE by dtac.=0D
=0D
-----Original Message-----=0D
From: =0D
Sender: =0D
Date: Thu, 03 Jan 2013 07:20:17 =0D
To: <>=0D
Reply-To: =0D
Subject: [Nature Recordists] Re: iRig pre=0D
=0D
> What microphone are you using with the iRigPre?=0D
=0D
Hi Vicki,=0D
sorry, you are right, I forgot this little detail!!!=0D
The microphone I used is an AT3032 48V powered by IRigPre.=0D
Thanks!=0D
=0D
Marco=0D
=0D
=0D
=0D
--- In  vickipowys  wrote:=0D
>=0D
> Marco,=0D
> =0D
> What microphone are you using with the iRigPre?=0D
> =0D
> For the Line In test, the LS5 is quite a bit noisier.=0D
> =0D
> For the Mic In test, the Sony has lower pitched noise, and the LS5  =0D
> mid-range noise.=0D
> =0D
> Vicki=0D
> =0D
> =0D
> On 03/01/2013, at 2:56 PM,  wrote:=0D
> =0D
> >=0D
> >=0D
> >=0D
> >=0D
> >=0D
> > Hi Max and All,=0D
> > here in dropbox the files of the practical test I promised for  =0D
> > IRigPre + Sony M10 Vs. IRigPre + Olympus LS5.=0D
> > Recorded 44,1 - 24bit.=0D
> > Always MAX GAIN for IRigPre.=0D
> >  .=0D
> > Line IN: level matched +5db for LS5; Mic sense LOW Vol.10 both for  =0D
> > Sony and for Olympus=0D
> > https://dl.dropbox.com/u/10964978/IRigPre_LineIN_SonyM10_vs_OlymLS5% =
=0D
> > 2B5db_Low10.WAV=0D
> >=0D
> > Mic IN: level matched +2db for M10; Mic sense LOW Vol.5 for Sony  =0D
> > Vol.2 for Olympus=0D
> > https://dl.dropbox.com/u/10964978/IRigPre_MicIN_SonyM10% =0D
> > 2B2db_vs_OlymLS5_Low3-5Sony_Low2Olym.WAV=0D
> >=0D
> > Here two video files swf Macromedia Flash Player of the same files=0D
> > http://dl.dropbox.com/u/10964978/IRigPre_LineIN_SonyM10_Vs_OlymLS5.swf=
=0D
> > http://dl.dropbox.com/u/10964978/IRigPre_MicIN_sony_vs_Olym.swf=0D
> >=0D
> > Probably, it may be better to repeat the test for Mic Input, I am  =0D
> > forced to lower the volume too much on both the recorders because  =0D
> > of the high volume (MAX) on the preamp. I think we need to find the  =
=0D
> > right balance between the two potentiometers, both the recorder and  =
=0D
> > the preamplifier.=0D
> >=0D
> > Marco Pesente=0D
> >=0D
> >=0D
> >=0D
> > --- In  "Max"   =0D
> > wrote:=0D
> >>=0D
> >> Hi Marco!=0D
> >> 50 days; unreal!!=0D
> >> You will find a much better signal with MIC IN rather than LINE.  =0D
> >> However, I'm not a technical man and am not sure this is correct;  =0D
> >> BUT, it does work well. I put the volume wheel of my LS-10 on 10  =0D
> >> and set on LOW setting. Like this you need only use the gain  =0D
> >> control on the iRigPre. Be careful to reduce gain on iRigPre to  =0D
> >> zero before turning on, or connecting to Olympus!=0D
> >> Have fun, and let us know how you progress.=0D
> >> Cheers=0D
> >> Max=0D
> >=0D
> >=0D
> >=0D
> >=0D
> > ------------------------------------=0D
> >=0D
> > "While a picture is worth a thousand words, a=0D
> > sound is worth a thousand pictures." R. Murray Schafer via Bernie  =0D
> > Krause.=0D
> >=0D
> > Yahoo! Groups Links=0D
> >=0D
> >=0D
> >=0D
>=0D
=0D
=0D
=0D









<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU