Does that mean they all have auto level control? If that can't be disabled =
is there any point trying to do recordings with them? Perhaps the iReg also=
has some way of disabling that.
> -----Original Message-----
> From:
> On Behalf Of Mark
> Sent: Friday, 7 December 2012 9:56 AM
> To:
> Subject: Re: [Nature Recordists] Re: iRig pre
>
>
>
> Hi Peter,
>
> iPhones/Pads and Androids/Tablets nor any phone that I am
> aware of have rec. levels. Sight and touch are the preferred
> input. I have far some far out pseudo-scientific theories
> that I just won't go into here, as to why this might so.
>
> Cheers,
>
> Mark
>
> Sent from my iPhone
>
> On Dec 7, 2012, at 4:25 AM, vickipowys t
> <
> <vickipowys%40skymesh.com.au> > wrote:
>
> > Peter,
> >
> > I don't own an iPhone so can't be sure what it has, but the
> iRig has a
> > manual rotating dial for levels. And, as Marco says, a headphone
> > socket.
> >
> > Vicki
> >
> > On 07/12/2012, at 7:14 AM, Peter Shute wrote:
> >
> > > IPhone has no recording level control?
> > >
> > >> -----Original Message-----
> > >> From:
> > >> <naturerecordists%40yahoogroups.com>
> > >>
> > >> <naturerecordists%40yahoogroups.com> ] On Behalf Of
> > >> vickipowys
> > >> Sent: Friday, 7 December 2012 6:44 AM
> > >> To:
> > >> <naturerecordists%40yahoogroups.com>
> > >> Subject: Re: [Nature Recordists] Re: iRig pre
> > >>
> > >>
> > >>
> > >> Peter,
> > >>
> > >> I can't see why you could not plug an ME66 directly into
> an IPhone
> > >> (with a specialized lead), but the advantage of the IRig is that
> > >> you can also control the recording levels.
> > >>
> > >> Vicki
> > >>
> > >> On 06/12/2012, at 7:35 AM, Peter Shute wrote:
> > >>
> > >>> Would you be able to plug an ME66/K6 directly into an
> > >> iPhone, assuming
> > >>> you had the right connector for plugging a mic into a
> mic/ headset
> > >>> socket? Or is that what the iReg pre is acting as in this case?
> > >>>
> > >>> Peter Shute
> > >>>
> > >>>> -----Original Message-----
> > >>>> From:
> > >>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com>
> > >>>>
> > >>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com> ] On Behalf Of
> > >> vickipowys
> > >>>> Sent: Thursday, 6 December 2012 7:08 AM
> > >>>> To:
> > >>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com>
> > >>>> Subject: Re: [Nature Recordists] Re: iRig pre
> > >>>>
> > >>>>
> > >>>>
> > >>>> Alan,
> > >>>>
> > >>>> All the advertising for the iRig Pre indicates that yes indeed
> > >>>> you could connect a Sennheiser ME66 to an iPhone. The iRig has
> > >> optional
> > >>>> power supply, you would switch it off if the mic
> supplied its own
> > >>>> power. Yes you do need the K6 unit with the ME66, I would
> > >> recommend
> > >>>> the one that uses its own battery power, 1 x AA
> battery lasts for
> > >>>> ages if you remember to switch it off between
> recording sessions.
> > >>>> You can also bypass the AA battery to use 48V phantom power.
> > >>>> If you intend to eventually use the ME66 with a smaller flash
> > >>>> card recorder then you would definitely need the AA
> > >>>> battery-powered K6 unit. Rode made handles and softie
> windshields
> > >>>> that are
> > >> much cheaper
> > >>>> than Rycote or Sennheiser.
> > >>>>
> > >>>> Hope this helps!
> > >>>>
> > >>>> Vicki
> > >>>>
> > >>>> On 06/12/2012, at 12:15 AM, symmerista wrote:
> > >>>>
> > >>>>> The Edutige does in fact do nothing more than amplifying
> > >>>> the iphone's
> > >>>>> sound. This does increase my students' ability to identify
> > >>>> unknowns,
> > >>>>> but post-processing, e.g., through Audacity, is probably at
> > >>>> least as
> > >>>>> helpful.
> > >>>>>
> > >>>>> My apologies for being dense here (ever since I lost
> > >> hearing in one
> > >>>>> ear I've 'focused' almost entirely on the visual rather
> > >>>> than the audio
> > >>>>> in the field), but if I splurged on the Sennheiser ME66
> > >> (and the K6
> > >>>>> too, I presume?), could I use the iRig Pre to connect it to
> > >>>> my iPhone?
> > >>>>> I realize that might be overkill, but for now that
> would clean
> > >>>>> my budget out, and I could then start saving up for a proper
> > >> recorder.
> > >>>>>
> > >>>>> Cheers,
> > >>>>>
> > >>>>> Alan
> > >>>>>
> > >>>>> --- In
> > >>>>> <naturerecordists%40yahoogroups.com>
> > >>>>> <naturerecordists%40yahoogroups.com>
> > >>>>> <naturerecordists%40yahoogroups.com> , vickipowys
> > >>>> <> wrote:
> > >>>>>>
> > >>>>>> Alan,
> > >>>>>>
> > >>>>>> The Edutige mic looks intriguing. I had a listen to a sample
> > >>>>>> recording but it seems to me that the hiss-noise increases
> > >>>> along with
> > >>>>>> the stronger signal from the mic, so it is not doing much
> > >>>> more than
> > >>>>>> amplifying the sound you are already getting from the
> > >>>> iPhone. All the
> > >>>>>> same, such gadgets can be useful to documenting wildlife
> > >> sounds if
> > >>>>>> nothing else is available. You would probably find the
> > >>>> windshield is
> > >>>>>> inadequate, but better than nothing.
> > >>>>>>
> > >>>>>> If you want to use a larger better quality mic you have to
> > >>>> consider
> > >>>>>> handling noise and most likely you would need a handle
> > >> and shock-
> > >>>>>> mount for it, and a decent wind cover such as one of
> the 'softie'
> > >>>>>> types. By the time you have all of that (e.g. Sennheiser
> > >>>> ME66 gun mic
> > >>>>>> is a great field mic for species recording), then you
> > >>>> might as well
> > >>>>>> go with a purpose-built recorder such as Sony or Olympus
> > >>>> or whatever
> > >>>>>> (lots of references on this list), and you can then set
> > >>>> the recording
> > >>>>>> sample rate to 96 K which will be useful for insect
> recordings.
> > >>>>>>
> > >>>>>> Meanwhile, you can probably do quite a lot with the
> > >> iPhone and it
> > >>>>>> would be no worse than the equipment that many of us
> > >>>> started out with
> > >>>>>> e.g. hissy cassette recorders and tie-pin microphones.
> > >>>>>>
> > >>>>>> good luck!
> > >>>>>>
> > >>>>>> Vicki
> > >>>>>>
> > >>>>>>
> > >>>>>> On 26/11/2012, at 9:06 AM, symmerista wrote:
> > >>>>>>
> > >>>>>>> Greetings,
> > >>>>>>>
> > >>>>>>> I'm intrigued by the iRig Pre. For my field biology class
> > >>>> I bought a
> > >>>>>>> $30 Edutige EIM-001 i-Microphone for my iPhone, and it
> > >> definitely
> > >>>>>>> made sounds somewhat louder, which helped for our main
> > >>>> purposes of
> > >>>>>>> recording unknown animals for later identification. The
> > >>>> Edutige also
> > >>>>>>> worked with most of my students' various Android phones,
> > >>>> though it's
> > >>>>>>> not marketed as such. Any chance that the iRig likewise has
> > >>>>>>> unadvertised Android compatibility?
> > >>>>>>>
> > >>>>>>> My main question, however, is what microphone would
> be a good,
> > >>>>>>> inexpensive choice to connect to an iphone/iRig setup. My
> > >>>>>>> objectives, for now, are not to produce
> "publication quality"
> > >>>>>>> sounds, but to capture good-quality sounds of
> birds, singing
> > >>>>>>> insects, frogs and toads for documentation and
> identification
> > >>>>>>> purposes. Portability is important, as I also lug around
> > >>>> a fair bit
> > >>>>>>> of camera equipment. I've looked at the specs of many
> > >>>>>>> different mikes, but after a while my head starts
> spinning as
> > >>>>>>> I
> > >> don't know
> > >>>>>>> nearly enough to decide which pros and cons are
> most relevant!
> > >>>>>>>
> > >>>>>>> Cheers,
> > >>>>>>>
> > >>>>>>> Alan
> > >>>>>>>
> > >>>>>>> --- In
> > >>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>> <naturerecordists%40yahoogroups.com> , "Max"
> > >>>> <maxcatterwell@>
> > >>>>>>> wrote:
> > >>>>>>>>
> > >>>>>>>> I did further testing last night, and decided to
> take another
> > >>>>>>>> approach this morning. Instead of starting from low
> > >>>> level (2 or 3)
> > >>>>>>>> on the LS-10, I set iRig to minimum and maxed Olympus to
> > >>>> 10. I then
> > >>>>>>>> slowly increased gain while studying the signal
> level on the
> > >>>>>>>> Olympus. I then compared recordings using
> spectogram view on
> > >>>>>>>> Audition. Although not particularly scientific, I'm of
> > >>>> the opinion
> > >>>>>>>> that this method produces quieter results. I need to
> > >>>> re-do the last
> > >>>>>>>> test tonight to confirm my opinion. I would really love
> > >>>> for one of
> > >>>>>>>> our techy sound specialists to get hold of one of these
> > >>>> and test.
> > >>>>>>>> The weather in the UK at the moment is pretty
> > >> horrendous, and it
> > >>>>>>>> doesn't look like I'll be getting out to record
> > >> wildfowl coming
> > >>>>>>>> into roost within the next few days. I can't wait to try
> > >>>> this out
> > >>>>>>>> in 'the field'.
> > >>>>>>>> Cheers
> > >>>>>>>> Max
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>> --- In
> > >>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>> <naturerecordists%40yahoogroups.com> , "Max"
> > >>>>>>>> <maxcatterwell@>
> > >>>>>>>> wrote:
> > >>>>>>>>>
> > >>>>>>>>> Hi to Marco and all,
> > >>>>>>>>> The lead arrived today, and I have just tested it and
> > >>>> this is what
> > >>>>>>>>> I've found. Plug into MIC; Turn LS-10 gain to 2 and
> > >> reduce iRig
> > >>>>>>>>> gain to minimum. Set sense to Low and turn on to
> > >> Record Pause;
> > >>>>>>>>> adjust gain on iRig. There will be no response if gain
> > >>>> is set to
> > >>>>>>>>> zero on LS-10.
> > >>>>>>>>> I've done a very quick test with these settings, and
> > >> at maximum
> > >>>>>>>>> gain on the iRig, and I have to say that I'm extremely
> > >>>> surprised
> > >>>>>>>>> at the quality. All being well I'll do another test
> > >>>> late at night
> > >>>>>>>>> with no outdoor traffic, and with all nearby electrical
> > >>>> components
> > >>>>>>>>> turned off. I will then submit a short sample for one
> > >>>> of our 'tech
> > >>>>>>>>> boys' to examine, and give us a more critical
> > >> opinion. I should
> > >>>>>>>>> have said that the mic I used was an AT3032.
> > >>>>>>>>> One thing already for the 'tech boys' is, that Audition
> > >>>> showed two
> > >>>>>>>>> identical waveforms; not one?
> > >>>>>>>>> Cheers
> > >>>>>>>>> Max
> > >>>>>>>>> p.s. recording at 88.2 - 24bit.
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> --- In
> > >>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>> <naturerecordists%40yahoogroups.com> , "Max"
> > >>>>>>>>> <maxcatterwell@>
> > >>>>>>>>> wrote:
> > >>>>>>>>>>
> > >>>>>>>>>> Hi Marco,
> > >>>>>>>>>> You are of course perfectly correct in saying that
> > >>>> headphones can
> > >>>>>>>>>> be used via the recording unit! As I understand it, the
> > >>>>>>>>>> eBay connector socket is designed to take a TRRS jack as
> > >>>> the iPhone/
> > >>>>>>>>>> iPod has. The advert has MAC in the title, and also
> > >>>> says 'Convert
> > >>>>>>>>>> your stereo headphones that also have an integrated
> > >>>> microphone'.
> > >>>>>>>>>> It will be interesting to find out; I too have
> > >> ordered one, on
> > >>>>>>>>>> the basis that I'm in no rush, and it's easier!
> > >>>>>>>>>> Cheers
> > >>>>>>>>>> Max
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>> --- In
> > >>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com> , m.pesente@ wrote:
> > >>>>>>>>>>>
> > >>>>>>>>>>> Hi Max,
> > >>>>>>>>>>> I know, it's a fancy way of what I have done to
> > >>>> connect the iRig
> > >>>>>>>>>>> Pre to an external recorder, but it's the only way I
> > >>>> was able to
> > >>>>>>>>>>> ensure that everything is working.
> > >>>>>>>>>>> Listening is done by connecting the headphones to the
> > >>>> recorder
> > >>>>>>>>>>> (using FelMicamp cable for now!), while the
> > >> headphone jack of
> > >>>>>>>>>>> the IRig Pre must be plugged with a 4 pins Jack,
> > >>>> preferably with
> > >>>>>>>>>>> the headset for Iphone (do not ask me why, but in my
> > >>>> case it is
> > >>>>>>>>>>> so!), because there is no signal for headphones
> > >> from Irig Pre!
> > >>>>>>>>>>> I just bought on Ebay the cable you sent the link:
> > >> I hope it
> > >>>>>>>>>>> works, even if I have some doubts because the OUT
> > >> on iRig Pre
> > >>>>>>>>>>> (as previously said)seems to be plugged with a
> 4 pins jack
> > >>>>>>>>>>> instead of 3 pins, but soon we'll know!
> > >>>>>>>>>>> I hope I explained the best...
> > >>>>>>>>>>> Thanks for the Ebay link!
> > >>>>>>>>>>>
> > >>>>>>>>>>> Marco Pesente from Italy
> > >>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>> --- In
> > >>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>> <naturerecordists%40yahoogroups.com> , "Max"
> > >>>>>>>>>>> <maxcatterwell@>
> > >>>>>>>>>>> wrote:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Hi Pesente,
> > >>>>>>>>>>>> Many thanks for your input here. I have to
> confess that I
> > >>>>>>>>>>>> didn't fully understand your explanation, probably
> > >>>> because I'm
> > >>>>>>>>>>>> not really awake yet! If I did understand that
> > >>>> you're using the
> > >>>>>>>>>>>> headphone OUT on the iRig, then I'm confused,
> > >>>> because I thought
> > >>>>>>>>>>>> I'd read somewhere that the headphone OUT was
> not passed
> > >>>>>>>>>>>> through from the iRig, but was a return from the
> > >>>> iPhone? BUT,
> > >>>>>>>>>>>> I'm not that well educated in this area, so I
> > >>>> probably got it
> > >>>>>>>>>>>> wrong.
> > >>>>>>>>>>>> Anyway, one method I was going to try, being quite
> > >> lazy, was
> > >>>>>>>>>>>> this:
> > >>>>>>>>>>>> http://www.ebay.co.uk/itm/330820239423?
> > >>>>>>>>>>>> ssPageName=3DSTRK:MEWAX:IT&_trksid=3Dp3984.m1423.l2649
> > >>>>>>>>>>>> To make it neater you could cut off the headphone lead
> > >>>>>>>>>>>> and insulate. The only problem with this is, if what I
> > >> heard is
> > >>>>>>>>>>>> correct, then there wouldn't be any signal
> from the iRig
> > >>>>>>>>>>>> headphone output.
> > >>>>>>>>>>>> Can you enlighten me on any of this please?
> > >>>>>>>>>>>> Cheers
> > >>>>>>>>>>>> Max
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> --- In
> > >>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com> , m.pesente@ wrote:
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>> Max,
> > >>>>>>>>>>>>> I connected the iRig Pre to some of my small audio
> > >>>> recorders
> > >>>>>>>>>>>>> (M10, LS5, Roland R05, Zoom H1 etc) feeding a
> > >>>> single AT 3032
> > >>>>>>>>>>>>> Ph 48v with very good results. I am very pleased
> > >> with this
> > >>>>>>>>>>>>> small microphone preamplifier iRig Pre suggested me
> > >>>> by Gianni
> > >>>>>>>>>>>>> Pavan. In order to use the iRig Pre on a device
> > >>>> other than a
> > >>>>>>>>>>>>> IOs system (iPhone, etc.), for which it was
> > >> designed, just
> > >>>>>>>>>>>>> plug in a 3.5mm "four pins" jack (the same of
> an IPhone
> > >>>>>>>>>>>>> headphones cable) to the IRig Pre headphones OUT
> > >>>> and a pair of
> > >>>>>>>>>>>>> headphones 3,5 Jack connected to a 10 cm cable
> > >> "FEL Socket
> > >>>>>>>>>>>>> Saver, stereo" sold by FelMicAmp. Only in this way
> > >>>> I'm able to
> > >>>>>>>>>>>>> obtain at the same time to record and monitor the
> > >> recording
> > >>>>>>>>>>>>> with a device different from IPhone system.
> > >>>>>>>>>>>>> Max, once you have made or found a cable that
> enables to
> > >>>>>>>>>>>>> connect the iRig Pre with an audio recorder in an
> > >>>> easier way
> > >>>>>>>>>>>>> than mine, I would be grateful if you would inform us.
> > >>>>>>>>>>>>> Thanks!
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>> Pesente Marco from Italy
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>> "I apologize for any mistakes due to typing by cell
> > >>>> phone and
> > >>>>>>>>>>>>> the help of the online translator!"
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>> --- In
> > >>>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com> , "Max"
> > >>>>>>>>>>>>> <maxcatterwell@> wrote:
> > >>>>>>>>>>>>>> Hi Mike and all,
> > >>>>>>>>>>>>>> Apologies for not getting back earlier. I have
> > >> to say that
> > >>>>>>>>>>>>>> I'm quite impressed with the iRig pre. I tried
> > >> it using my
> > >>>>>>>>>>>>>> only remaining AT3032 (really wish I hadn't sold my
> > >>>>>>>>>>>>>> other
> > >>>>>>>>>>>>>> two!) and the quality improvement over the
> > >>>> internal mic of my
> > >>>>>>>>>>>>>> iPod Touch was obvious. Most obvious was loss of low
> > >>>>>>>>>>>>>> frequency random noise, in addition to the obvious
> > >>>> benefit of
> > >>>>>>>>>>>>>> gain. My simple tests were using my 66 year old
> > >>>> ears, which
> > >>>>>>>>>>>>>> aren't that good, so take this as you will; I'm
> > >> sorry it's
> > >>>>>>>>>>>>>> not more scientific. What I intend to do next is
> > >>>> to try the
> > >>>>>>>>>>>>>> beast with my LS-10 after buying/making an adapter.
> > >>>>>>>>>>>>>> As an aside note, I re-tried the the Nakamichi
> > >> CM-300 set
> > >>>>>>>>>>>>>> again yesterday with my LS-10. This time, I used the
> > >>>>>>>>>>>>>> low setting sense setting and then upped
> amplitude by
> > >>>>>>>>>>>>>> 6db in Audition. The results certainly confirmed what
> > >> Umashankar
> > >>>>>>>>>>>>>> said; this is a really good quality, quiet and
> > >>>> useful set to
> > >>>>>>>>>>>>>> carry (shotgun CP4 with very narrow super cardioid
> > >>>> pattern;
> > >>>>>>>>>>>>>> omni and cardioid shorts). Whether or not I'd be
> > >>>> prepared to
> > >>>>>>>>>>>>>> pay the asking price I've seen on eBay USA
> > >>>> sometimes, I'm not
> > >>>>>>>>>>>>>> sure, but if any of you get the chance to
> pick one up
> > >>>>>>>>>>>>>> cheaply, I'd say don't hesitate. The only
> > >> downside is that
> > >>>>>>>>>>>>>> the batteries are not cheap, but according to
> > >>>> Umashankar it's
> > >>>>>>>>>>>>>> posssible to convert to phantom power.
> > >>>>>>>>>>>>>> Cheers
> > >>>>>>>>>>>>>> Max
> > >>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>
> > >>>>>>>>>>>>>> --- In
> > >>>>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>> <naturerecordists%40yahoogroups.com> , "Max"
> > >>>>>>>>>>>>>> <maxcatterwell@> wrote:
> > >>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>> No problem Mike, glad to be of help.
> > >>>>>>>>>>>>>>> Max
> > >>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>> --- In
> > >>>>>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>>>>>> <naturerecordists%40yahoogroups.com>
> > >>>>>>>>>>>>>>> <naturerecordists%40yahoogroups.com> ,
> > >>>> Michael Dalton <mdaltonarielle@> wrote:
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>> Howdy Max!
> > >>>>>>>>>>>>>>>> =EF=BF=BD
> > >>>>>>>>>>>>>>>> Thanks for the lead. I have filed it as a
> > >>>> suggestion for my
> > >>>>>>>>>>>>>>>> friend.
> > >>>>>>>>>>>>>>>> =EF=BF=BD
> > >>>>>>>>>>>>>>>> I wonder why a budget US based supplier
> such as Nady
> > >>>>>>>>>>>>>>>> doesn't offer something similar. Maybe they do;
> > >>>> I haven't
> > >>>>>>>>>>>>>>>> looked yet.
> > >>>>>>>>>>>>>>>> =EF=BF=BD
> > >>>>>>>>>>>>>>>> The LS-10 owner hasn't said=EF=BF=BDwhether any of my
> > >>>> suggestions
> > >>>>>>>>>>>>>>>> have helped.
> > >>>>>>>>>>>>>>>> =EF=BF=BD
> > >>>>>>>>>>>>>>>> Mike
> > >>>>>>>>>>>>>>>> Florida
> > >>>>>>>>>>>>>>>> www.ParrotSpeech.com
> > >>>>>>>>>>>>>>>> =EF=BF=BD
> > >>>>>>>>>>>>>>>> =EF=BF=BD
> > >>>>>>>>>>>>>>>> Re: Noise in LS-10
> > >>>>>>>>>>>>>>>> Tue Oct 16, 2012 6:35 am (PDT) . Posted by:
> > >>>>>>>>>>>>>>>> "Max" oatcruncher
> > >>>>>>>>>>>>>>>> Forgot the link:
> > >>>>>>>>>>>>>>>> http://tech. groups.yahoo. com/group/
> > >> naturerecordists /
> > >>>>>>>>>>>>>>>> message/ 49179
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>> --- In naturerecordists@ yahoogroups. com, "Max"
> > >>>>>>>>>>>>>>>> <maxcatterwell@ ...> wrote:
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>> --- In naturerecordists@ yahoogroups. com,
> > >>>> Michael Dalton
> > >>>>>>>>>>>>>>>>> <mdaltonarielle@ > wrote:
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>> The other approach would be to use an
> > >> external mike and
> > >>>>>>>>>>>>>>>>> preamp. Is there a miniature system that is
> > >> decent and
> > >>>>>>>>>>>>>>>>> inexpensive for bypassing the internal mikes?
> > >>>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>>> Mike
> > >>>>>>>>>>>>>>>>>> Florida
> > >>>>>>>>>>>>>>>>>> http://www.parrotsp eech.com/
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>> See my iRig post here Max
> > >>>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>> [Non-text portions of this message have
> been removed]
> > >>>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>>
> > >>>>>>>>>>>>>>
> > >>>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> ------------------------------------
> > >>>>>>>
> > >>>>>>> "While a picture is worth a thousand words, a sound
> is worth a
> > >>>>>>> thousand pictures." R. Murray Schafer via Bernie Krause.
> > >>>>>>>
> > >>>>>>> Yahoo! Groups Links
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> ------------------------------------
> > >>>>>
> > >>>>> "While a picture is worth a thousand words, a sound
> is worth a
> > >>>>> thousand pictures." R. Murray Schafer via Bernie Krause.
> > >>>>>
> > >>>>> Yahoo! Groups Links
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>
> > >>>
> > >>> ------------------------------------
> > >>>
> > >>> "While a picture is worth a thousand words, a sound is worth a
> > >>> thousand pictures." R. Murray Schafer via Bernie Krause.
> > >>>
> > >>> Yahoo! Groups Links
> > >>>
> > >>>
> > >>>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > > ------------------------------------
> > >
> > > "While a picture is worth a thousand words, a sound is worth a
> > > thousand pictures." R. Murray Schafer via Bernie Krause.
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
> >
>
>
>
>
>
>
|