[Top] [All Lists]

6. Re: cable for long xlr microphone cables

Subject: 6. Re: cable for long xlr microphone cables
From: "Avocet" madl74
Date: Fri Jun 22, 2012 6:00 pm ((PDT))
> Are you saying only one blue wire would go to pin 3, and the other
> blue wire to the ground?  And one white to pin 2, the other to
> ground?


That's the BBC way I was taught for wiring quad cable. Perhaps the
other way also balances out strong magnetic fields but I've never had
one of those to test out. :-) If it works your way, use that. Any
cable will do for most audio uses. My priorities are 1) ease of
wrapping 2) cheapness.


David Brinicombe
North Devon, UK
Cogito cogito ergo cogito sum - Ambrose Bierce

<Prev in Thread] Current Thread [Next in Thread>
  • 6. Re: cable for long xlr microphone cables, Avocet <=

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU