Re: MX391 Field Trials in a Robust Soundscape (was Dawn Chorus Comp

["copperfin3" copperfin3]

Tom,

I've been under the impression that the MX391 mics required a preamp in ord=
er to function. If the LS-10's input stage and PIP are enough to make these=
 mics work, why does Shure insist that you need a preamp?

John Morris


--- In  "tk7859" <> wrote:
>
> Hi Klas
>
> I bought the MX391LP model which does not have a pre-amp, just an attache=
d 4 metre lead terminated in a 4 pin mini connector.  The MX391 (non LP) mo=
del does have a pre-amp included but this is in an adaptor into which the 4=
 pin mini connector fits.  I have a user guide which gives these details.  =
I will be happy to make a .pdf of this and email it to you if you wish (won=
't be until Sunday though).
>
> The only thing inside the mesh cover is a very "WL183 looking" mic.
>
> I cut the 4 pin connectors off my leads and just connected them to a ster=
eo 3.5mm jack plug.  The LS-10 has no problems powering it with its PIP.  I=
 have not tried it with minidisc PIP as yet.