naturerecordists
[Top] [All Lists]

2. Re: OP Update: SASS construction/design question

Subject: 2. Re: OP Update: SASS construction/design question
From: "erikguldager" erikguldager
Date: Tue Feb 14, 2012 4:59 am ((PST))
Or perhaps more like this as a square shape would have a few bad
reflections:
http://www.freeimagehosting.net/j7qee

--- In  "erikguldager" <>
wrote:
>
> So a fisrst update after recording and comparing the SASS with a dual
boundary setup.
>
> The stereo localization of the SASS sounds very realistic. I can
easily pinpoint the physical positions in the sound field. Sounds from
the rear have a sound quite similar to how I experience them myself. I
think a dual SASS will be very nice for realistic 4-channel surround
ambiance recordings.
>
> But the dual boundary has a significantly superior Left Right
separation, almost unnaturally so, but that is not at all bad in my line
of work (FILM and TV). But it doesn't have any front rear localization
at all (for natural reasons) and that does not really work a lot of the
time.
>
> So what about a boundary shaped like this? # (although straight of
course)
> Really just an extended square
>
> Has anyone tried anything like that?
>










<Prev in Thread] Current Thread [Next in Thread>
  • 2. Re: OP Update: SASS construction/design question, erikguldager <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU