[Top] [All Lists]

Re: Tascam DR40 - 4 Track.

Subject: Re: Tascam DR40 - 4 Track.
From: "Mike Rooke" picnet2
Date: Fri Sep 23, 2011 5:45 am ((PDT))
Hi Robin,
             With more speculation than fact, its perhaps using this IC:

I know the Edirol/Roland R09HR used the stereo version.

And (unconfirmed fact) "rather a lot" of the portable recorders are using s=
imilar chipsets.

Problem with the video is the preamp levels are changed between mic's?

--- In  "Robin" <> wrote:
> Anyone try this out yet to test the pre-amps?
> FYI the following video:
> I can clearly hear the difference between the RODE NTG-1 (18dBA self-nois=
e) and RODE NT2A (7dBA self-noise) which means the recorder is somewhere in=
> -- robin

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU