Post processing Omni's:

Subject:	Post processing Omni's:
From:	"Mike Rooke" picnet2
Date:	Fri Jul 29, 2011 2:34 pm ((PDT))

Heres an new blog entry which shows how two AT3032's can be used coincident=
ally to form a stereo image. While there are some technicalities with this =
setup, essentially monitoring in mono and post processing to stereo due to =
no field recorder supporting such matrixing in the field? - it remains an i=
nteresting technique if all you have is a pair of omni's and blimp :) Or re=
quire lower noise than a dedicated MS configuration and do not have the spa=
ce for a boundary and associated windscreen. - Two AT3032's in a blimp.

http://www.urlme.net/blog/?p=3D1744

Marks page also discusses the finer details. http://www.williamsonic.com/Di=
poleMic/

BR
Mike.

<Prev in Thread]	Current Thread	[Next in Thread>
Post processing Omni's:, Mike Rooke <=

Previous by Date:	Invisible Valley 001 - Before, miguelisaza
Next by Date:	Re: Humpback songsters, link is now good--, Kawika
Previous by Thread:	Invisible Valley 001 - Before, miguelisaza
Next by Thread:	More reasons to record -- any way, anywhere we can, Bernie Krause
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU