[Top] [All Lists]

Re: Tripod mounts

Subject: Re: Tripod mounts
From: "chrishails50" chrishails50
Date: Tue Nov 30, 2010 10:17 pm ((PST))
Thanks John and David for further advice.


--- In  "Avocet" <> wrote:
> I've used a metal plate with a tapped 1/4" thread in it. The European
> spec for the tap is 1/4 inch Whitworth thread (BSW). The pilot hole is
> 5.1mm but 5mm works as well. If you are using aluminium. a drop of oil 
> will prevent the tap binding.
> David
> David Brinicombe
> North Devon, UK
> Cogito cogito ergo cogito sum - Ambrose Bierce

"While a picture is worth a thousand words, a 
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Tripod mounts, chrishails50 <=

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU