| Subject: | 1. Re: cable question |
|---|---|
| From: | "Dan Dugan" dandugan_1999 |
| Date: | Wed Jul 7, 2010 5:05 pm ((PDT)) |
> I want to make a cable to interface with my 5 pin cable that stays on the= recorder but that would go to only one mic ( an ME66). The mic will be pow= ered by phantom power from the SD 702. In the past I had a Y cable that fee= d the output from the mic to both channels of a Sony TCD-D10 pro II and als= o supplied phantom power over that cable. > Would wiring the cable to act as a Y cable work with the SD 702 and ME66?= IS there any danger is sending the phantom power to a single mic using a Y= cable configuration? You can turn off one track and get files half the size! And make a headphon= e preset to put that track on both ears. -Dan |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: The Muriemike story...., jtudor2005 |
|---|---|
| Next by Date: | 2. Re: cable question, Wil Hershberger |
| Previous by Thread: | 1. Re: cable question, Bird Recordist |
| Next by Thread: | 4. Re: cable question, Paul Jacobson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU