Aren't you able to turn off the phantom on one of the mic inputs? (either i=
n
the menu or with the tone key and the two left buttons, HDD and menu keys)
You can on the 744T, not sure about the 702.
Hope this helps!
Andy UK
_____
From:
On Behalf Of Wil Hershberger
Sent: 06 July 2010 00:48
To:
Subject: [Nature Recordists] cable question
I want to make a cable to interface with my 5 pin cable that stays on the
recorder but that would go to only one mic ( an ME66). The mic will be
powered by phantom power from the SD 702. In the past I had a Y cable that
feed the output from the mic to both channels of a Sony TCD-D10 pro II and
also supplied phantom power over that cable.
Would wiring the cable to act as a Y cable work with the SD 702 and ME66? I=
S
there any danger is sending the phantom power to a single mic using a Y
cable configuration?
Thanks a lot,
Wil Hershberger
Nature Images and Sounds, LLC
Hedgesville, WV
The Songs of Insects
My Blog
|