At 5:05 AM +0000 6/9/10, Stuart wrote:
>
>
>I have posted a photo of a wind shield I made for a rode 4 stereo
>mic. The front is a kitchen sieve from the 5 and 10. the main body
>is made of plastic plumbing components. I cut away most of the body
>of the large tube and inserted 1/4" plastic mesh. the green material
>inside is open cell crisper( frig vegies tray) lining plastic foam,
>again the 5&10. The smaller diameter tube is lined with gray foam.
>the large tube detaches from the back and the Rode is inserted
>through the small tube and there is just enoughof the mic protruding
>to fit the mount supplied with the mic. I then bought a childs
>"beenie" and pulled it over all.
>Stuart.
>
re:
http://tinyurl.com/375w5yf
Very striking, very Sci-Fi. Do you think the collar or ring around
the base of the strainer could be blocking some in-coming sound and
reflecting some internally? Maybe the collar could be made less wide?
Hate to destroy the perfect proportions of your artwork though. Rob D.
--
|