Try this Klas
http://en.m.wikipedia.org/wiki/XLR_connector?wasRedirected=3Dtrue
Phil
On 1 May 2010, at 13:01, Klas Strandberg <> wrote:
again...
does anybody know what XLR means?
Klas
At 00:33 2010-05-01, you wrote:
>Thank you for the information.
>
>Somewhat related to the NTG3, the capsule is 95 mm from the top of
>the mic, not the XLR end for those that wish to precisely align the
>shotgun capsule with another mic.
>
>-Mike.
>
>--- In "jtudor2005" <> wrote:
> >
> > Apparently new Rode mics are now shipping with a spacer fitted
> inside the XLR socket. This is to allow a tighter fit on poor
> quality XLR connectors.
> > See the last question in the Rode FAQ here
> > http://www.rodemic.com/support.php#q22
> >
> > or an article here
> >
> http://pro-audio.bhinsights.com/content/important-notice-r0de-mic-owners.=
html
> >
> > Some users are having trouble fitting good XLR connectors because of it=
.
> >
>
>
>
>
>------------------------------------
>
>"While a picture is worth a thousand words, a
>sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause
>Yahoo! Groups Links
>
>
>
Telinga Microphones, Botarbo,
S-748 96 Tobo, Sweden.
Phone & fax int + 295 310 01
email:
website: www.telinga.com
|