naturerecordists
[Top] [All Lists]

10. Re: DC power for SD 722

Subject: 10. Re: DC power for SD 722
From: "Dan Dugan" dandugan_1999
Date: Sat Nov 21, 2009 1:18 pm ((PST))
> I have the same needs. I do not have soldiering skills.  Is there anyone =
on the group who sells the hirose connector already wired and ready to conn=
ect to the battery?

I can do that, but it's more economical to buy an assembly from a motion pi=
cture audio shop if it's a stock item.

> I had an extra hirose connector and wiring but when I hooked the wires up=
 to my battery the wires melted, obviously it was hooked up to the pins inc=
orrectly.

Ouch!

-Dan Dugan





<Prev in Thread] Current Thread [Next in Thread>
  • 10. Re: DC power for SD 722, Dan Dugan <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU