Hi Rob,
Maybe a simple low voltage cutoff switch could be made with a relay, resist=
or, and a momentary switch? I am not much of an electronics geek, or I woul=
d have figured this out a long time ago.
John
--- In Rob Danielson <> wrote:
>
> At 3:07 AM +0000 11/21/09, hartogj wrote:
> >
> >Wired either way, my 702 fails the switch-over almost every time.
> >
> >John Hartog
> >
>
> Hi John--
> I'm not sure whether the exact, same 702 switch-over problem occurs
> with the 722, but Rich Peet has solved the switch-over/bounce back
> issue for the 722 using a Steca Solsum charge controller. Simple $30
> box I think. You can find Rich's email address in the archive. His
> discussion with SD tech is here:
> http://forums.sounddevices.com/showthread.php?t=3D1802 (must be
> registered and logged in)
>
> I've been using high-capacity batteries so I'm not sure whether my
> 744T has developed this particular problem since the hardware upgrade
> or not. It never had the problem before the upgrade but I've had a
> couple of hangs that might have occurred at switch-over after the
> upgrade.
>
> Maybe we can get Rich to draw-up a wiring plan and set-up
> instructions for the Steca to make available. I took another look at
> the SD forum tonight and didn't see updates after Rich's suggestions.
> Rob D.
> --
>
|