naturerecordists
[Top] [All Lists]

2. Re: DC power for SD 722

Subject: 2. Re: DC power for SD 722
From: "stancourtney" stancourtney
Date: Sat Nov 21, 2009 6:08 am ((PST))
I have the same needs. I do not have soldiering skills.  Is there anyone on=
 the group who sells the hirose connector already wired and ready to connec=
t to the battery?

I had an extra hirose connector and wiring but when I hooked the wires up t=
o my battery the wires melted, obviously it was hooked up to the pins incor=
rectly.

Thanks,

Stan Courtney_Central Illinois

www.stancourtney.com













--- In  Rob Danielson <> wrote:
>
> At 3:07 AM +0000 11/21/09, hartogj wrote:
> >
> >Wired either way, my 702 fails the switch-over almost every time.
> >
> >John Hartog
> >
>
> Hi John--
> I'm not sure whether the exact, same 702 switch-over problem occurs
> with the 722, but Rich Peet has solved the switch-over/bounce back
> issue for the 722 using a Steca Solsum charge controller. Simple $30
> box I think. You can find Rich's email address in the archive. His
> discussion with SD tech is here:
> http://forums.sounddevices.com/showthread.php?t=3D1802 (must be
> registered and logged in)
>
> I've been using high-capacity batteries so I'm not sure whether my
> 744T has developed this particular problem since the hardware upgrade
> or not. It never had the problem before the upgrade but I've had a
> couple of hangs that might have occurred at switch-over after the
> upgrade.
>
> Maybe we can get Rich to draw-up a wiring plan and set-up
> instructions for the Steca to make available. I took another look at
> the SD forum tonight and didn't see updates after Rich's suggestions.
> Rob D.
> --
>








<Prev in Thread] Current Thread [Next in Thread>
  • 2. Re: DC power for SD 722, stancourtney <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU