I've just realised if it isn't clear, that you do of course make the initial
fold inside out i.e. fur to fur.
Max
--- In "Max Catterwell" <>
wrote:
>
> Having finally solved the problem of uploading piccies to the Photos folder,
> I have just posted a piccie in the LS-10 folder of the individual muffs I
> made for my LS-10 al la Rycote.
> Cut two pieces 3 1/2 x 2 1/4 inches. Fold the longer length in half and just
> sew the two open edges together. Depending on the weave (on most stuff it's
> pretty close) sew in about about 1/8 inch or so from the edge so that there's
> sufficient to hold. I just did an overhand stitch from the 'closed' corner to
> the 'open' and back again. Obviously you have to tuck all the fur in out of
> the way, and this is a bit trickier on the second edge. When finished, very
> carefully turn inside out and tug over foams. These are not meant for taking
> on and off because by this method of construction the seams would give out
> quite quickly, but hey, it does the job!
> Max
>
|