| Subject: | Re: pressure build-up ring |
|---|---|
| From: | "Mike Feldman" gidney_n_cloyd |
| Date: | Tue Oct 21, 2008 9:26 pm ((PDT)) |
On 21 Oct, 2008, at 10:27 PM, David Kuhn wrote: > ... or does anyone know, if the ring would work with the MKH in a > Walt-mod SASS? > The ring in question is really a ball or sphere, right? If so, then the SASS *is* the ring in Walt's configuration! I believe the MKH20s are mounted so that the diaphragms are flush with the front surface of the SASS body. The rings would keep them from fitting in the SASS. Compare the DPA response adjusters: <http://www.dpamicrophones.com/module.php? MID=3D101&itemid=3DL30B&PID=3D&function=3Dpdescription> <http://www.dpamicrophones.com/module.php? MID=3D101&itemid=3DUA0777&PID=3D&function=3Dpdescription> Think I'll try my AT3032s with a bowling ball... -- Mike |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: pressure build-up ring, Martyn Stewart |
|---|---|
| Next by Date: | Re: pressure build-up ring, David Kuhn |
| Previous by Thread: | Re: pressure build-up ring, Martyn Stewart |
| Next by Thread: | Re: pressure build-up ring, David Kuhn |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU