Thanks, Rob. Yes, I take a line from the headphone jack on the
recorder into the box. My headphones plug into the box and I hear
left-right stereo, but the recording is unchanged in M/S.
Scott
--- In Rob Danielson <>
wrote:
>
> At 4:54 AM -0800 11/28/07, Scott Sherk wrote:
> >After searching the web I found plans for a
> >simple m/s headphone decoder on Mark Griswald's
> >site at
>
><http://www.pugetsoundman.com/articles/MSheadphone.htm>http://www.pug
etsoundman.com/articles/MSheadphone.htm
> >or
> ><http://tinyurl.com/3ak5cj>http://tinyurl.com/3ak5cj
> >I successfully built the device after getting
> >some help from Mark. It wasn't difficult and I'm
> >no expert. If interested you can have a look at
> >the device on my website at
> ><http://www.thethirdbarn.org/Pages/Scott%20Sherk/sounds/M-
S_gear/index.htm>http://www.thethirdbarn.org/Pages/Scott%
20Sherk/sounds/M-S_gear/index.htm
> >or
> ><http://tinyurl.com/2sgd55>http://tinyurl.com/2sgd55
> >I've used the decoder successfully with a MKH
> >30/40 > Rolls Phantom Box > Sony Hi-MD and also
> >with the much simpler MKH 30/40 > Fostex Fr2-LE.
> >Ultimately, I've gone back to monitoring the
> >undecoded signal in mono: one less box to
> >wrestle.
>
> Nice craftsmanship and solution Scott! Here, it appears you are
encoding M-S:
> http://www.thethirdbarn.org/Pages/Scott%20Sherk/sounds/M-
S_gear/pages/Minidisk_m-s_rig.htm
> Are you saying the same box can be wired
> post-recorder to power headphones? Rob D.
>
> >Scott
> >
> >scott sherk
> >www.thethirdbarn.org
>
>
>
> --
>
>
>
|