naturerecordists
[Top] [All Lists]

Re: PZM mod result

Subject: Re: PZM mod result
From: "Lou Judson" inaudio
Date: Thu Apr 26, 2007 8:40 am ((PDT))
Don't forget that low end response is intimately dependent on the
size of the boundary - a six inch square and a foot square and a
whole wall will have drastically different low end extension. Useful
thing!

<L>

On Apr 25, 2007, at 8:03 PM, Rob Danielson wrote:

>>
>> I'm also thinking of changing the metal plates to an acrylic/
>> Plexiglas ones to lessen the weight for traveling
>> nice to finally have portable stereo boundary mics for field
>> recording!
>
> Likely you were successful! Some electret mic
> capsules have a fairly high impedance and a
> decrease in low Hz response might provide a clue
> about that. Rob D.





<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU