Subject: | Re: Ares PII+ mic input |
---|---|
From: | "Dan Dugan" dandugan_1999 |
Date: | Sun Feb 25, 2007 10:17 pm ((PST)) |
>"Danny Meltzer" wrote: >> How does a microphone interface with [the Ares PII+]... Oryoki wrote, >There's a 12 pin DIN connector on the bottom end of the Ares PII+. >Nagra offers XLR to 12 pin cables for both one and two channel >recording. The Ares PII+ provides 48V phantom power to mics attached >in this way. > >At the top end of the PII+, there's a socket for a mic capsule. Nagra >offers mono and stereo electret condenser mic capsules for this socket. I believe that the mic socket at the top is the 12-pin DIN. One socket serves all. >[rant] "Nagra offers" is a nice way of saying you have to pay extra >for this item. Even a $200 digital camera comes with a manual and a >wrist strap. You'd think that you'd get these items with the $2900 >PII+, but nooooo, they're optional. [/rant] It's Swiss. -Dan Dugan (disclosure: Nagra dealer) |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Ares PII+ mic input, Martyn Stewart |
---|---|
Next by Date: | Re: Ares PII+ mic input, Danny Meltzer |
Previous by Thread: | Re: Ares PII+ mic input, Martyn Stewart |
Next by Thread: | Re: Ares PII+ mic input, Danny Meltzer |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU