naturerecordists
[Top] [All Lists]

Apology

Subject: Apology
From: Barb Beck <>
Date: Tue, 21 Dec 2004 09:56:14 -0700
I am not awake this morning.  Replied to a CBC message.  Sorry about that.

Barb
Barb Beck wrote:

>Sunday Jan 2
>
>Keep track of what you see and we will either stop by or if we are
>unable to do that just email me the results
>
>Barb
>
>Walter Knapp wrote:
>
>=20
>
>>From: Rob Danielson <>
>>
>>
>>
>>=20=20=20
>>
>>>Hi Walt--
>>>AllOrings suggested the Buna product line because
>>>the rings are more elastic. Do you happen to know
>>>the sizes that worked for you? I can see if this
>>>size range is well represented in the $10 sample
>>>kit. Thanks! Rob D.
>>>
>>>
>>>=20=20
>>>
>>>=20=20=20=20=20
>>>
>>The Buna are more elastic, but not as durable, note this from their
>>material page: "Poor resistance to sunlight, weathering and ozone." You
>>would need to watch them more for cracking. These are the standard
>>hardware store o-rings. The silicon are stretchy enough, remember that's=

>>what Rycote uses. Buna is also one of those that would stick to the mics=

>>over time in my SASS, where the o-ring is continually pressed against
>>the mic. The only disadvantage of the silicon I've found is that they
>>are fairly easily cut or torn when setting them up. I have used the buna=

>>o-rings in the past because of easy availability.
>>
>>Anyway try some of various ones. The smallest width of o-ring they have
>>in lots of sizes is 1/16, which is what I use. The SASS/MKH-20 takes a
>>fatter o-ring but that's special to it, 1"x 1 3/16"x 3/32". On the size
>>chart the ID & OD will give you the diameter of the circle of the
>>o-ring. You would size them so that there was a little stretch. Rycote
>>ones are stretched about 10-30%. The diameters you would need would have=

>>to come from your suspension. It's like sizing rubber bands, but less
>>stretch.
>>
>>As far as what sizes I have, I've got 1/16 silicon in a variety of sizes=

>>all the way up to several inches in diameter. As I noted I've been
>>accumulating the various sizes for future use. Rycote suspensions don't
>>take near that large a o-ring. Somewhere around 1" diameter or less.
>>When you compare their prices on replacement o-rings to Alloring's
>>retail prices you will see just how much they are engaged in highway
>>robbery.
>>
>>Walt
>>
>>
>>
>>
>>
>>"Microphones are not ears,
>>Loudspeakers are not birds,
>>A listening room is not nature."
>>Klas Strandberg
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>=20=20=20
>>
>
>
>
>"Microphones are not ears,
>Loudspeakers are not birds,
>A listening room is not nature."
>Klas Strandberg
>Yahoo! Groups Links
>
>
>
>
>
>
>
>=20
>


________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
  • Apology, Barb Beck <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU