naturerecordists
[Top] [All Lists]

Sony ECM 957

Subject: Sony ECM 957
From: "Chris Owens" <>
Date: Thu, 8 May 2003 19:25:17 +0100
Hi,

I recently read on the DV Info board that someone believes that the Sony
ECM 957 5-pin XLR can be prought out to balance stereo pair. The logic
being that the mic has a 5-pin XLR, which does have just enough pins to
make this possible.

Can anyone confirm this, or is it (as I suspect) wishfull thinking. Does
anyone have the pin functions for this mic?

The 957 comes with a 5-pin XLR to 3.5 Stereo jack. One has to wonder why
Sony took this route rather than hardwire the connector as they have on
the 907.

As an aside, I have found this mic much better than the cheaper 907,
with good clear sound.

Regards,

Chris Owens.
www.chrisowens.co.uk




________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU