birding-aus

[Fwd: Re: [Birding-Aus] Bird Hides - designs]

To:
Subject: [Fwd: Re: [Birding-Aus] Bird Hides - designs]
From: brian fleming <>
Date: Mon, 22 Mar 2010 14:16:49 +1100
--- Begin Message ---
To: Greg & Val Clancy <>
Subject: Bird Hides - designs
From: brian fleming <>
Date: Mon, 22 Mar 2010 12:13:18 +1100
And some birdos, such as school kids, are quite short, and some are in wheelchairs, so that they need something quite different from the usual fixed bench arrangement. Fixed benches are also very tough on scopes on tripods.

Keeping vegetation somewhat pruned in front should be routine maintenance. Of course a hide without screened approaches is useless.

A travelling friend showed me pictures of a simple hide in France, overlooking a wetland. It consisted of a solid back-wall, and a front wall made of many horizontal length of branch, so there were many apertures of varying widths at all levels. The watchers were adequately screened in front and did not show up as silhouettes because of the rear screen. No roof I believe. The floor was matted in some way to deaden feet noises, or may have been earth. Of course it faced away from the sun. The hide at the Spectacles, Point Cook Park, faces the sun which makes it hard on eyes and cameras.

Anthea Fleming

Greg & Val Clancy wrote:
One consideration when constructing a bird hide is to ensure that there are a number of windows at varying heights and ones that are suitable for scopes. If people can't see well out of a hide they will just walk around outside potentially causing disturbance to the birds. Remember some birdos are tall.


Greg Clancy
Ecologist
Coutts Crossing







> Hi all
>
>
>
> Coliban Water in Bendigo, Central Vic, is contemplating erecting a
> publicly accessible bird hide at the Epsom Wastewater
Treatment Plant.
> The agreed "best spot" is at the well known "Crake Pond", which is
> right by the roadside.  As well as supporting a regular
population of
> Crakes & Rails, this area also has a population of the endangered
> Growling Grass Frog.
>
>
>
> I have been asked whether there are any good designs
available for a
> bird hide.  Obviously we have all visited many and have
ideas of what
> works & what doesn't, but does anyone have access to
drawings of same.
> Do not have to be high quality.

==========www.birding-aus.org
birding-aus.blogspot.com

To unsubscribe from this mailing list,
send the message:
unsubscribe
(in the body of the message, with no Subject line)
to: 
==========


===============================
www.birding-aus.org
birding-aus.blogspot.com

To unsubscribe from this mailing list, send the message:
unsubscribe (in the body of the message, with no Subject line)
to: 
===============================




--- End Message ---
===============================
www.birding-aus.org
birding-aus.blogspot.com

To unsubscribe from this mailing list, 
send the message:
unsubscribe 
(in the body of the message, with no Subject line)
to: 
===============================
<Prev in Thread] Current Thread [Next in Thread>
  • [Fwd: Re: [Birding-Aus] Bird Hides - designs], brian fleming <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU