birding-aus

Mounting Nest Boxes

To: Paul Rose <>
Subject: Mounting Nest Boxes
From: Peter Crow <>
Date: Sun, 16 Sep 2001 06:41:36 -0700
Hello Paul,

The most tree friendly way of supporting Nest boxes I have come across
is that used by Alan Franks (Hollow Log Homes) in SE  Qld.

He uses a piece of strong clothes line type galvanised wire running
through the box around the trunk and looped over a branch on the far
side of the tree.

Two holes need to be drilled in the sides of the box near the join with
the back.  He puts a piece of old plastic hose (green of course) over
the wire to stop it rubbing into the tree and leaves plenty of slack int
he loop around the tree to allow for growth. Hope this helps.

Peter



Birding-Aus is on the Web at
www.shc.melb.catholic.edu.au/home/birding/index.html
To unsubscribe from this mailing list, send the message
"unsubscribe birding-aus" (no quotes, no Subject line)
to 


<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU