ts-7000
[Top] [All Lists]

Re: [ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical network

To: "" <>
Subject: Re: [ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical network stacks?
From: Jonathan Leslie <>
Date: Sun, 3 Nov 2013 06:30:51 -0800 (PST)


ynezz, 

I'm confused,  I have to send messages to  two different devices, both have address 1.1.1.101. The way I've done it in the past was to set up two different IP stacks, with different SOCK.  I want to repeat this on a TS-7800 only this time I need 4 different IP stacks as I have 4 different devices 1.1.1.101.   

Jleslie48





From: Petr Štetiar <>
To:
Sent: Sunday, November 3, 2013 3:56 AM
Subject: Re: [ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical network stacks?

 
<> [2013-11-01 12:04:21]:

> that is exactly backwards from what I need to do. I want the SAME IP
> Addresses to DIFFERENT interfaces

No you don't want that. You want to go to Amazon and order some TCP/IP book :-)

-- ynezz




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU