[ts-7000] TS-7800 stucks after power up

To:
Subject:	[ts-7000] TS-7800 stucks after power up
From:	"ed.yossi" <>
Date:	Sun, 01 Sep 2013 07:08:09 -0000

Hi,
I gained ts7800 sbc card. 
I connected it to 5v power supply (which I got with the dev kit)
and connected the rs232 cable (which I got with the dev kit)  to my computer.
1.      The controller is immediately warm up to high temperature.  Is it 
normal?
2.      After that controller printed out the following lines:
>> TS-BOOTROM - built May 11 2011
>> Copyright (c) 2008, Technologic Systems
>> Booting from onboard NAND flash...
.
.
.
.
Finished booting in 0.74 seconds
Type 'tshelp' for help

It stucks.

Can somebody help?


Thanks in advanced.




------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo Groups is subject to:
    http://info.yahoo.com/legal/us/yahoo/utos/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7800 stucks after power up, ed.yossi <=

Previous by Date:	[ts-7000] ts-7800 how do I make 4 (at least 2) identical network stacks?, jleslie48
Next by Date:	[ts-7000] Re: ts-7800 how do I make 4 (at least 2) identical network stacks?, Cody Browne
Previous by Thread:	[ts-7000] ts-7800 how do I make 4 (at least 2) identical network stacks?, jleslie48
Next by Thread:	[ts-7000] Re: ts-7800 how do I make 4 (at least 2) identical network stacks?, Cody Browne
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU