|
[Attachment(s) from Sainath Nambiar included below]
Hi all, I have recently started with TS7200, I want to interface the TS-IS0485 board and talk to a Modbus compliant device in the half duplex mode. So I set the ComB on the board to half duples mode(jumpers on) and address (ADD2 Jumper On). I tried programming using the sample code from the TS site. I have attached the code and I am able to write to the device but while reading from the device I get garbage values and even though the device may be connected or not , I have verified the device by connecting a USB-RS485 converter. Let me know in case there is something missing in my code. Regards Sainath Attachment(s) from Sainath Nambiar 1 of 1 File(s) __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |