ts-7000
[Top] [All Lists]

[ts-7000] How to control a DC motor using TS-7350?

To:
Subject: [ts-7000] How to control a DC motor using TS-7350?
From: "ali" <>
Date: Sat, 06 Jul 2013 08:52:24 -0000
I am new to TS-7350!!!!
how to control a DC motor using H-bridge from TS-7350?
 i have 2 DIO connected to H-bridge. All i need is to send a 01 and 10 to the 2 
DIOs.
I dont know how to do it...
if someone can provide me the code and the procedure how to compile and run on 
this board.
I would be greatful to you as i havent run a single program on this board.
This would be my first code




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] How to control a DC motor using TS-7350?, ali <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU