[ts-7000] Problem in load

To:
Subject:	[ts-7000] Problem in load_ts7300 command
From:	"Asim" <>
Date:	Fri, 15 Feb 2013 13:05:54 -0000

Hi,

I have transferred my .rbf file to the ts-7300 board. Now when I try to load it 
using the load_ts7300 command the screen suddenly goes black and the system 
goes on standby. Does anyone have an idea what might be the problem?

Regards
Asim



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Problem in load_ts7300 command, Asim <= RE: [ts-7000] Problem in load_ts7300 command, Ian Thompson

Previous by Date:	[ts-7000] 7250: MAX197 A/D present, overclocker_mmu
Next by Date:	RE: [ts-7000] Problem in load_ts7300 command, Ian Thompson
Previous by Thread:	[ts-7000] 7250: MAX197 A/D present, overclocker_mmu
Next by Thread:	RE: [ts-7000] Problem in load_ts7300 command, Ian Thompson
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] Problem in load_ts7300 command