[ts-7000] Ts-7200

To:
Subject:	[ts-7000] Ts-7200
From:	"khouryelie" <>
Date:	Thu, 31 Jan 2013 10:44:38 -0000

HELLO,

I AM WORKING WITH A ts-7200, and running my com2 port in full duplex

I AM NOT ABLE TO RECEIVE DATA ON MY COM2 PORT, I CAN ONLY TRANSMIT

WHY IS THAT ?

_______________________________

FROM TS-7200 MANUAL

switch COM2 into Full duplex RS-485 mode, the COM2 Mode register at 0x22C0_0000
must be set to Hex 01. In this mode, the TX drivers are always asserted.


"TX drivers are always asserted" is this my prob ?



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Ts-7200, khouryelie <=

Previous by Date:	[ts-7000] Re: RS-485 full duplex sending and not recieving, khouryelie
Previous by Thread:	[ts-7000] Re: RS-485 full duplex sending and not recieving, khouryelie
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU