[ts-7000] Baudrate Error

To:
Subject:	[ts-7000] Baudrate Error
From:	"khouryelie" <>
Date:	Wed, 23 Jan 2013 16:29:53 -0000

hi

i am trying to use the SER-4 peripheral on my ts 7200

when i do a setserial -a /dev/tts/...

i get baudrate set to 115200

but when i use minicom i cant read from those serial ports unless its 9600 
baudrate

anyone has any idea why ? 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Baudrate Error, khouryelie <= Re: [ts-7000] Baudrate Error, Walter Marvin [ts-7000] Re: Baudrate Error, khouryelie

Previous by Date:	[ts-7000] Re: TS 7200 serial port at full duplex, khouryelie
Next by Date:	Re: [ts-7000] Baudrate Error, Walter Marvin
Previous by Thread:	[ts-7000] Crosscompiling to TS-8900-4700, cyberdog0@ymail.com
Next by Thread:	Re: [ts-7000] Baudrate Error, Walter Marvin
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU