[ts-7000] Re: TS 7200 serial port at full duplex

["khouryelie" <>]

thanks everyone but i am starting to think its not my code that's wrong it's 
just the cable connections

i am configuring with my code port COM2 to 485 FULL DUPLEX
but i am using a null modem cable THE SAME I USED TO TEST ports 232 and 
connecting that modem cable to a converter cable from 485 -> 232 then reading 
with minicom Through a 232 TO USB 

I think that sending from 485 port to a null modem( that was used with success 
with 232 ) is the mistake

ANYONE KNOW IF I should get A 485 null modem cable ? 
IS THERE ANY DIFFRENCE between NULL MODEM CABLES ? SOME FOR 232 QND OTHES FOR 
485 FULL DUPLEX ? 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/