--- In "Cpt. Dondo" wrote:
>
> Is anyone using Openwrt (http://www.openwrt.org) to build images for the
> ts72xx series of boards?
>
> I have an image built for it, but I can't get the kernel to boot. Basically
> when I exec the new kernel, the board gets comletely unresponsive.
>
> The board is fine; I can boot a ts kernel just fine.
>
> I'd like to be able to build my own kernels, though.....
>
Here's what happens:
RedBoot> load -r -b 0x00218000 -m disk hda1:openwrt-ep93xx-zImage
Raw file loaded 0x00218000-0x002fb9a7, assumed entry at 0x00218000
RedBoot> exec -c "root=/dev/sda2 console=ttyAM0,115200"
Using base address 0x00218000 and length 0x000e39a8
and it becomes completely unresponsive. No "Uncompressing kernel" message or
anything....
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|