I've already tried the -vj option for ppp with the the result..
and VJ compression doesn't seem to be an issue with the GR64 board ...
On Tue, 2012-11-06 at 19:14 +0000, naturalwatt wrote:
>
> --- In Thierry <> wrote:
> >
> > Hi,
> > I'm trying to establish a GPRS connection using a TS-GSM1 modem on a
> > TS7200 board running 2.4.26-ts11 kernel.
> > When using my old TS-GSM1 based on a GR64 wavecom modem, I launch
> > my pppd script and everything just works fine.
> > But when I'm using a new TS-GSM1 board based on a Q64 wavecom modem, I
> > can't get the connection because the modem is hanging just after the
> > IPCP request.... (see logs below)
> > Everything is the same except the TS-GSM1 board...
> >
> > Any idea ?
> > Thierry
>
> You might zoom in on this line:
>
> > Nov 6 12:35:43 pppd[691]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 00
> > 1> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > Nov 6 12:35:43 pppd[691]: rcvd [LCP TermReq id=0x3]
> > Nov 6 12:35:43 pppd[691]: LCP terminated by peer
>
>
> You are requesting VJ compression and getting a NAK, I think.
>
> There is a PPP option to turn that off - I might be barking up the wrong
> tree, but it does ring a bell from a couple of years ago.
>
>
> >
> > With GR64 :
> > Nov 6 07:39:04 pppd[451]: pppd 2.4.3 started by root, uid 0
> > Nov 6 07:39:37 chat[454]: abort on (BUSY)
> > Nov 6 07:39:37 chat[454]: abort on (VOICE)
> > Nov 6 07:39:37 chat[454]: abort on (NO CARRIER)
> > Nov 6 07:39:37 chat[454]: abort on (NO DIALTONE)
> > Nov 6 07:39:37 chat[454]: abort on (NO DIAL TONE)
> > Nov 6 07:39:37 chat[454]: abort on (ERROR)
> > Nov 6 07:39:37 chat[454]: send (AT^M)
> > Nov 6 07:39:37 chat[454]: expect (OK)
> > Nov 6 07:39:37 chat[454]: AT^M^M
> > Nov 6 07:39:37 chat[454]: OK
> > Nov 6 07:39:37 chat[454]: -- got it
> > Nov 6 07:39:37 chat[454]: send (AT+CGDCONT=1,"IP","websfr"^M)
> > Nov 6 07:39:38 chat[454]: expect (OK)
> > Nov 6 07:39:38 chat[454]: ^M
> > Nov 6 07:39:38 chat[454]: AT+CGDCONT=1,"IP","websfr"^M^M
> > Nov 6 07:39:38 chat[454]: OK
> > Nov 6 07:39:38 chat[454]: -- got it
> > Nov 6 07:39:38 chat[454]: send (ATDT*99***1#^M)
> > Nov 6 07:39:38 chat[454]: expect (CONNECT)
> > Nov 6 07:39:38 chat[454]: ^M
> > Nov 6 07:39:38 chat[454]: ATDT*99***1#^M^M
> > Nov 6 07:39:38 chat[454]: CONNECT
> > Nov 6 07:39:38 chat[454]: -- got it
> > Nov 6 07:39:38 chat[454]: send (^M)
> > Nov 6 07:39:38 pppd[451]: Serial connection established.
> > Nov 6 07:39:38 pppd[451]: using channel 2
> > Nov 6 07:39:38 pppd[451]: Using interface ppp0
> > Nov 6 07:39:38 pppd[451]: Connect: ppp0 <--> /dev/ttyS3
> > Nov 6 07:39:39 pppd[451]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <maa
> > gic 0x2761d38b> <pcomp> <accomp>]
> > Nov 6 07:39:39 pppd[451]: rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000>>
> > <auth pap>]
> > Nov 6 07:39:39 pppd[451]: No auth is possible
> > Nov 6 07:39:39 pppd[451]: sent [LCP ConfRej id=0x1 <auth pap>]
> > Nov 6 07:39:39 pppd[451]: rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>>
> > ]
> > Nov 6 07:39:39 pppd[451]: sent [LCP ConfReq id=0x2 <asyncmap 0xa0000>>
> > <magic 0x2761d38b> <pcomp> <accomp>]
> > Nov 6 07:39:39 pppd[451]: rcvd [LCP ConfReq id=0x2 <asyncmap 0xa0000>>
> > <pcomp> <accomp>]
> > Nov 6 07:39:39 pppd[451]: sent [LCP ConfAck id=0x2 <asyncmap 0xa0000>>
> > <pcomp> <accomp>]
> > Nov 6 07:39:39 pppd[451]: rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000>>
> > <magic 0x2761d38b> <pcomp> <accomp>]
> > Nov 6 07:39:39 pppd[451]: sent [LCP EchoReq id=0x0 magic=0x2761d38b]
> > Nov 6 07:39:39 pppd[451]: kernel does not support PPP filtering
> > Nov 6 07:39:39 pppd[451]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 00
> > 1> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > Nov 6 07:39:39 pppd[451]: rcvd [IPCP ConfReq id=0x3 <addr 85.102.119..
> > 136>]
> > Nov 6 07:39:39 pppd[451]: sent [IPCP ConfAck id=0x3 <addr 85.102.119..
> > 136>]
> > Nov 6 07:39:39 pppd[451]: rcvd [LCP EchoRep id=0x0 magic=0x0 77 88]
> > Nov 6 07:39:39 pppd[451]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 00
> > 1>]
> > Nov 6 07:39:39 pppd[451]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <mm
> > s-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > Nov 6 07:39:42 pppd[451]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <mm
> > s-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > Nov 6 07:39:44 pppd[451]: rcvd [IPCP ConfNak id=0x2 <addr 10.26.5.93>>
> > <ms-dns1 172.24.101.211> <ms-dns3 172.24.201.212>]
> > Nov 6 07:39:44 pppd[451]: sent [IPCP ConfReq id=0x3 <addr 10.26.5.93>>
> > <ms-dns1 172.24.101.211> <ms-dns3 172.24.201.212>]
> > Nov 6 07:39:44 pppd[451]: rcvd [IPCP ConfAck id=0x3 <addr 10.26.5.93>>
> > <ms-dns1 172.24.101.211> <ms-dns3 172.24.201.212>]
> > Nov 6 07:39:44 pppd[451]: local IP address 10.26.5.93
> > Nov 6 07:39:44 pppd[451]: remote IP address 85.102.119.136
> > Nov 6 07:39:44 pppd[451]: primary DNS address 172.24.101.211
> > Nov 6 07:39:44 pppd[451]: secondary DNS address 172.24.201.212
> > Nov 6 07:39:44 pppd[451]: Script /etc/ppp/ip-up started (pid 462)
> > Nov 6 07:39:48 pppd[451]: Script /etc/ppp/ip-up finished (pid 462), ss
> > tatus = 0x0
> >
> >
> > Here connection is up, I've got IP address and all is fine ....
> >
> >
> >
> > Now with the Q64 :
> > Nov 6 12:35:38 pppd[691]: pppd 2.4.3 started by root, uid 0
> > Nov 6 12:35:39 chat[692]: abort on (BUSY)
> > Nov 6 12:35:39 chat[692]: abort on (VOICE)
> > Nov 6 12:35:39 chat[692]: abort on (NO CARRIER)
> > Nov 6 12:35:39 chat[692]: abort on (NO DIALTONE)
> > Nov 6 12:35:39 chat[692]: abort on (NO DIAL TONE)
> > Nov 6 12:35:39 chat[692]: abort on (ERROR)
> > Nov 6 12:35:39 chat[692]: send (AT^M)
> > Nov 6 12:35:39 chat[692]: expect (OK)
> > Nov 6 12:35:39 chat[692]: AT^M^M
> > Nov 6 12:35:39 chat[692]: OK
> > Nov 6 12:35:39 chat[692]: -- got it
> > Nov 6 12:35:39 chat[692]: send (AT+CGDCONT=1,"IP","websfr"^M)
> > Nov 6 12:35:40 chat[692]: expect (OK)
> > Nov 6 12:35:40 chat[692]: ^M
> > Nov 6 12:35:40 chat[692]: AT+CGDCONT=1,"IP","websfr"^M^M
> > Nov 6 12:35:40 chat[692]: OK
> > Nov 6 12:35:40 chat[692]: -- got it
> > Nov 6 12:35:40 chat[692]: send (ATDT*99***1#^M)
> > Nov 6 12:35:40 chat[692]: expect (CONNECT)
> > Nov 6 12:35:40 chat[692]: ^M
> > Nov 6 12:35:40 chat[692]: ATDT*99***1#^M^M
> > Nov 6 12:35:40 chat[692]: CONNECT
> > Nov 6 12:35:40 chat[692]: -- got it
> > Nov 6 12:35:40 chat[692]: send (^M)
> > Nov 6 12:35:40 pppd[691]: Serial connection established.
> > Nov 6 12:35:40 pppd[691]: using channel 14
> > Nov 6 12:35:40 pppd[691]: Using interface ppp0
> > Nov 6 12:35:40 pppd[691]: Connect: ppp0 <--> /dev/ttyS3
> > Nov 6 12:35:41 pppd[691]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <maa
> > gic 0x94a8924e> <pcomp> <accomp>]
> > Nov 6 12:35:41 pppd[691]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <maa
> > gic 0x94a8924e> <pcomp> <accomp>]
> > Nov 6 12:35:43 pppd[691]: rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmm
> > ap 0x0> <magic 0xb10d0dbc> <pcomp> <accomp> <auth pap>]
> > Nov 6 12:35:43 pppd[691]: No auth is possible
> > Nov 6 12:35:43 pppd[691]: sent [LCP ConfRej id=0x1 <auth pap>]
> > Nov 6 12:35:43 pppd[691]: rcvd [LCP ConfReq id=0x2 <mru 1500> <asyncmm
> > ap 0x0> <magic 0xb10d0dbc> <pcomp> <accomp>]
> > Nov 6 12:35:43 pppd[691]: sent [LCP ConfAck id=0x2 <mru 1500> <asyncmm
> > ap 0x0> <magic 0xb10d0dbc> <pcomp> <accomp>]
> > Nov 6 12:35:43 pppd[691]: sent [LCP EchoReq id=0x0 magic=0x94a8924e]
> > Nov 6 12:35:43 pppd[691]: kernel does not support PPP filtering
> > Nov 6 12:35:43 pppd[691]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 00
> > 1> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > Nov 6 12:35:43 pppd[691]: rcvd [LCP TermReq id=0x3]
> > Nov 6 12:35:43 pppd[691]: LCP terminated by peer
> > Nov 6 12:35:43 pppd[691]: sent [LCP TermAck id=0x3]
> > Nov 6 12:35:43 pppd[691]: rcvd [LCP EchoRep id=0x0 magic=0xb10d0dbc]
> > Nov 6 12:35:43 pppd[691]: Hangup (SIGHUP)
> > Nov 6 12:35:43 pppd[691]: Modem hangup
> > Nov 6 12:35:43 pppd[691]: Connection terminated.
> >
> > Grrrr !!!
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|