ts-7000
[Top] [All Lists]

[ts-7000] Re: Problem with sdcard-sdhc.o on ts-7260

To:
Subject: [ts-7000] Re: Problem with sdcard-sdhc.o on ts-7260
From: "hec85aragon" <>
Date: Mon, 01 Oct 2012 16:03:36 -0000
Hi,

I already have the SDHC card mounted on the ts-board and seems to be working 
fine. I had to re-install the module, replacing the original sdcard.o.

The only problem I'm facing now is that the driver doesn't load at boot up. I 
need to load it manually by typing "insmod sdcard-sdhc.o" everytime the board 
restarts.

Is this a normal behavior? or do I need to modify some configuration script in 
order for it to detect the module at boot up?

Thanks again,

H.

--- In  Walter Marvin <> wrote:
>
> The sd may just be bad.  Restore from backup
>
>
>
> ________________________________
>  From: Jim Jackson <>
> To: 
> Sent: Saturday, September 29, 2012 3:53 PM
> Subject: Re: [ts-7000] Problem with sdcard-sdhc.o on ts-7260
> 
>
>  
>
> You may have formatted the sd card on an upto date linux system.
> Modern mke2fs uses a large (256) I-node size by default. Linux 2.4
> needs I-nodes of size 128, so recreate the filesystem on the card
>
> mke2fs -I 128 /dev/sdX1
>
> where 'X' is whatever you sdcard reader comes up as.
>
> On Fri, 28 Sep 2012, hector aragon wrote:
>
> > Hi, I am currently using a standard TS-7260 with the 2.4.26-ts11 kernel. I
> > downloaded the sdcard-sdhc.o module from the ftp server and installed it on
> > the ts7260 board, but when I try to mount an sdcard hc I get the following
> > error:
> >
> > EXT2-fs: unable to read superblock
> > mount: Mounting /dev/sdcard0/disc0/part1 on /mnt failed: Invalid argument
> >
> > The sdhc card I'm trying to mount has the correct format ext2.
> >
> > Any ideas on what could be wrong?
> >
> > Any help would be much appreciated. Thanks in advance.
> >
> > H.
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU