[ts-7000] Re: Can't execute Linux - invalid entry address

["kamran" <>]

Hi,

I have been able to get my hand on a TS-7200 as well, and I too get the same 
message. I did also add the exec line to the fconfig script.
I just wanted to ask whether you did work around this error.

Thanks,

KB
--- In  "jfahlmanacd" <> wrote:
>
> I am rather new to linux and have run across the following problem 
> using the developer's kit. I wanted to boot from the CF provided in 
> the developer's kit so I changed the execute command using fconfig so 
> that:
>  
>  exec -c "console=ttyAM0,115200 root=/dev/hda1"
> 
> But after doing that I get the error "Can't execute Linux - invalid 
> entry address" when trying to boot to the CF.
> 
> I have now tried to revert back to the original:
> 
>  exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
> 
> But I still get the same error:
> 
> 
> 
> >> TS-BOOTROM, Rev 1.06 - built 14:21:24, Dec  5 2005
> >> Copyright (C) 2005, Technologic Systems
> >> TS-7200: Rev E0 CPU, Rev C PLD, 32MB SDRAM
> 
> +IDE failed to identify unit 0 - wrote: b0, read: 0
> Ethernet eth0: MAC address 00:d0:69:40:31:01
> IP: 192.168.0.50/255.255.255.0, Gateway: 192.168.0.11
> Default server: 192.168.0.11
> 
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version current-TS_5 - built 15:41:04, Mar  8 
> 2005
> 
> Platform: TS-7200 Board (ARM920T) Rev A
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> 
> RAM: 0x00000000-0x02000000, [0x00044c28-0x01fdd000] available
> FLASH: 0x60000000 - 0x60800000, 64 blocks of 0x00020000 bytes each.
> == Executing boot script in 0.100 seconds - enter ^C to abort
> RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
> Can't execute Linux - invalid entry address
> RedBoot> 
> 
> 
> 
> There is also the IDE failed problem but I still get the "Can't 
> execute..." error even with the CF removed.
> 
> Any help is greatly appreciated.  Thanks,
> Jason
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/