ts-7000
[Top] [All Lists]

[ts-7000] TS-7550 documentation

To:
Subject: [ts-7000] TS-7550 documentation
From: "bru22003" <>
Date: Sat, 22 Sep 2012 14:41:16 -0000

Hi all,

I have spent several hours googling these three qestion but can't find much.  I 
have also read the 7550 manual many times and can't get any satisfaction.  In 
the 7550 manual it states

"There is an onboard LM73 temperature sensor that is connected over #I2C. You 
can easily interface with this by calling ts7500ctl:"

1. If this true, how can I talk to it

# ts7500ctl --gettemp
tempsensor_ok=0
temperature=0.000
#

2. what do these two ts7500ctl options do?

>   -I, --extendedtempon    Enable extended temp (200Mhz CPU)
>   -C, --extendedtempoff   Disable extended temp (250Mhz CPU)

I sure hope it is not in the manual, because I have looked.

Thank

Angel




> Usage: ts7500ctl [OPTION] ...
> Technologic Systems SBUS manipulation.
> 
> General options:
>   -a, --address=ADR       SBUS address
>   -r, --peek16            16-bit SBUS read
>   -w, --poke16=VAL        16-bit SBUS write
>   -g, --getmac            Display ethernet MAC address
>   -s, --setmac=MAC        Set ethernet MAC address
>   -R, --reboot            Reboot the board
>   -t, --getrtc            Display RTC time/date
>   -S, --setrtc            Set RTC time/date from system time
>   -i, --info              Display board FPGA info
>   -e, --greenledon        Turn green LED on
>   -b, --greenledoff       Turn green LED off
>   -c, --redledon          Turn red LED on
>   -d, --redledoff         Turn red LED off
>   -D, --setdio=LVAL       Set DIO output to LVAL
>   -O, --setdiodir=LVAL    Set DIO direction to LVAL (1 - output)
>   -G, --getdio            Get DIO input
>   -Z, --getdioreg         Get DIO direction and output register values
>   -x, --random            Get 16-bit hardware random number
>   -W, --watchdog          Daemonize and set up /dev/watchdog
>   -A, --autofeed=SETTING  Daemonize and auto feed watchdog
>   -X, --resetswitchon     Enable reset switch
>   -Y, --resetswitchoff    Disable reset switch
>   -I, --extendedtempon    Enable extended temp (200Mhz CPU)
>   -C, --extendedtempoff   Disable extended temp (250Mhz CPU)
>   -h, --help              This help
>  



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU