ts-7000
[Top] [All Lists]

[ts-7000] Re: Wifi USB-N13 fails to connect WPA on ts-7553

To:
Subject: [ts-7000] Re: Wifi USB-N13 fails to connect WPA on ts-7553
From: "ramirosenbaum" <>
Date: Thu, 12 Jul 2012 04:41:23 -0000
hi,
Did you manage to connect to a WEP network?
It's been a while, but I think it didn't work for me.
Thanks.

--- In  "daniel.desrude" <> wrote:
>
> I just realized the WIFI-N-USB wiki page says what I need to do.  Even after 
> installing a newer version of wpa_supplicant I was pointing to an older 
> version.  After doing the following as described in the wiki I was able to 
> get this working.
> 
> http://wiki.embeddedarm.com/wiki/WIFI-N-USB
> 
> 4.3.1.2 Corrective Action
> The solution is to install the Debian version of `wpa_supplicant` and use 
> that for configuring WPA. In order to install the new wpa_supplicant, perform 
> the following steps:
> mv /usr/local/bin/wpa_supplicant /usr/local/bin/wpa_supplicant.old
> apt-get update && apt-get install wpasupplicant #This assumes a proper 
> internet connection is established
>  
> # reset the shell to find the new wpa_supplicant
> exec bash
>  
> # Verify that it is the correct version:
> wpa_supplicant -v
> It should return at least 0.6.4 as the version number
> 
> 
> --- In  "daniel.desrude" <daniel.desrude@> wrote:
> >
> > 
> > /usr/local/bin/wpa_supplicant -ira0 -Dwext  c/etc/wpa_supplicant_custom.conf
> > -B
> > 
> > When you ran this command did you ever get the error
> > 
> > Unsupported driver 'wext'
> > 
> > 
> > --- In  "ramirosenbaum" <ramirosenbaum@> wrote:
> > >
> > > I finally managed to get a WPA2 connection - If it's any help.
> > > 
> > > 1. I changed /usr/local/bin/wpa_supplicant with a newer version from the 
> > > Debian
> > > packages for Lenny:
> > > http://packages.debian.org/lenny/arm/wpasupplicant/download
> > > 
> > > 2. I added /usr/lib/libpcsclite.so.1.0.0, needed by the new 
> > > wpa_supplicant.
> > > Downloaded from:
> > > http://packages.debian.org/lenny/arm/libpcsclite1/download
> > > 
> > > 3. Updated /etc/wpa_supplicant_custom.conf:
> > > network={
> > > ssid="Elhalel_Rosenbaum-2"
> > > #psk="abc123abc"
> > > psk=0c201c18b0b506b14ff459d3087b6399066107b49a83f07514d29a85154411ac
> > > proto=RSN
> > > }
> > > 
> > > 4. Ran:
> > > /usr/local/bin/wpa_supplicant -ira0 -Dwext 
> > > -c/etc/wpa_supplicant_custom.conf
> > > -B
> > > udhcpc -i ra0
> > > 
> > > --- In  "ramirosenbaum" <ramirosenbaum@> wrote:
> > > >
> > > > hi,
> > > > I'm trying to connect my ts7553 via the attached Wifi aSUS USB-N13 
> > > > (WIFI-N-USB) dongle.
> > > > 
> > > > I've followed the instructions on 
> > > > http://oz.embeddedarm.com/~mark/index.php/WIFI-N-USB.
> > > > 'Open Access point' and 'WEP encryption' connect successfully.
> > > > 'WPA2-PSK' (WPA) fails.
> > > > 
> > > > Following the instructions:
> > > > 1. Running:
> > > >      > wpa_supplicant -ira0 -Dralink -c/etc/wpa_supplicant_custom.conf 
> > > > -B
> > > >    works fine.
> > > > 2. Running:
> > > >      > iwconfig ra0
> > > >      ra0       Ralink STA  ESSID:"Elhalel_Rosenbaum-2"  
> > > > Nickname:"RT2870STA"
> > > >                Mode:Managed  Frequency=2.412 GHz  Access Point: 
> > > > 00:0D:F0:3E:EA:16
> > > >                Bit Rate=54 Mb/s
> > > >                RTS thr:off   Fragment thr:off
> > > >                Encryption key:854D-329F-9953-ED55-153E-57E7-CFB5-3595 
> > > > [4]
> > > >                Link Quality=100/100  Signal level:-39 dBm  Noise 
> > > > level:-63 dBm
> > > >                Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
> > > >                Tx excessive retries:0  Invalid misc:0   Missed beacon:0
> > > >    Seems fine as well.
> > > > 3. Running:
> > > >      > dhclient ra0
> > > >      There is already a pid file /var/run/dhclient.pid with pid 2611
> > > >      killed old client process, removed PID file
> > > >      Internet Systems Consortium DHCP Client V3.1.1
> > > >      Copyright 2004-2008 Internet Systems Consortium.
> > > >      All rights reserved.
> > > >      For info, please visit http://www.isc.org/sw/dhcp/
> > > > 
> > > >      Listening on LPF/ra0/bc:ae:c5:7d:88:0c
> > > >      Sending on   LPF/ra0/bc:ae:c5:7d:88:0c
> > > >      Sending on   Socket/fallback
> > > >      DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6
> > > >      DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 12
> > > >      DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 15
> > > >      DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 17
> > > >      DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 11
> > > >      No DHCPOFFERS received.
> > > >      No working leases in persistent database - sleeping.
> > > > 
> > > > My /etc/wpa_supplicant_custom.conf:
> > > >      network={
> > > >              ssid="Elhalel_Rosenbaum-2"
> > > >              proto=RSN
> > > >              #key_mgmt=WPA-PSK
> > > >              #pairwise=CCMP TKIP
> > > >              #group=CCMP TKIP
> > > >              #psk="abc123abc"
> > > >              
> > > > psk=0c201c18b0b506b14ff459d3087b6399066107b49a83f07514d29a85154411ac
> > > >      }
> > > > 
> > > > Anyone had better luck?
> > > > 
> > > > (hope no-one uses my WiFi password)
> > > > 
> > > > thanks, Rami
> > > >
> > >
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU