If it helps, sometime ago there was module code by Phil McCarley, that used
a timer interrupt to do max197 readings at rates upto aprox 8KHz. That
would provide a starting point for the timer stuff. It used to be in the
files section of the yahoo group. If not get back to me by email.
On Fri, 6 Jul 2012, Damian wrote:
> Hello:
>
> I am using the TS-7260 board with the TS-LINUX on it. I was looking into the
> EP9302 User manual and I am interested in suing the processors timer
> interrupts. I was wondering if I would have to write a driver in order to
> access the processors interrupts, or if that can be easily used on the
> user-space?.
> I notice that interrupts are managed on the processor by accessing the
> specific memory addresses. Writing and reading to those specific values using
> /dev/mem will allow me perform the desired task?
>
> thanks you
>
> Damian
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|