Re: [ts-7000] Compiling kernel module for lenny-eabi 2.6-29

To:
Subject:	Re: [ts-7000] Compiling kernel module for lenny-eabi 2.6-29
From:	Don Tucker <>
Date:	Mon, 26 Mar 2012 09:30:59 -0500

Did you run depmod on the System.map for the new kernel? In the past,
unless I've named the rebuilt kernel exactly the same as the original
kernel (i.e. 2.6.29-ts), I haven't been able to load the modules properly.

Don
On 3/17/2012 12:54 PM, mmcdonal2001 wrote:


Hello,

A question about compiling kernel modules:

I've successfully compiled my kernel module using the TS supplied
cross-compiler: crosstool-linux26-3.4.4-2005q3-2

I'm running the TS-lenny-eabi 2.6-29 debian distribution on my TS-7300

When I try to insmod it fails, dmesg contains the following:

version magic '2.6.29-ts ARMv5 ' should be '2.6.29-ts preempt
mod_unload ARMv4 '

Does anyone know how to configure my kernel so I get the correct
module format? Or is something else wrong.

Thanks

Mike

smime.p7s
Description: S/MIME Cryptographic Signature

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Compiling kernel module for lenny-eabi 2.6-29, mmcdonal2001 Re: [ts-7000] Compiling kernel module for lenny-eabi 2.6-29, Don Tucker <=

Previous by Date:	[ts-7000] Re: TS7800 errors, naturalwatt
Next by Date:	[ts-7000] Re: TS7800 errors, Brian Paquette
Previous by Thread:	[ts-7000] Compiling kernel module for lenny-eabi 2.6-29, mmcdonal2001
Next by Thread:	[ts-7000] usb problem on TS7800, charliewxj
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU