I found this:
http://www.embeddedarm.com/about/resource.php?item=485
but it doesn't say anything about compiling kernel modules. How would I, for
instance, compile the files in the gpio.tar?
--- In Jim Jackson <> wrote:
>
>
>
>
> On Mon, 20 Feb 2012, danthackett wrote:
>
> > can I compile kernel modules on the board? or do I have to cross compile?
> > If so, how do I go about doing that?
>
> As far as I remember, how to cross compile is in the board documentation.
>
> >
> > --- In Jim Jackson <jj@> wrote:
> > >
> > >
> > >
> > >
> > > On Mon, 20 Feb 2012, danthackett wrote:
> > >
> > > > I need to write a kernel module / device driver for a ts-7260 and I
> > > > came
> > > > across the gpio.tar.bz2 in the files section. Can somebody explain how
> > > > I
> > > > compile this? All I need is a function that is called when an external
> > > > interrupt is generated. What do I need to do to compile and install a
> > > > kernel module on this board?
> > >
> > > There is full documment here...
> > >
> > > http://tldp.org/LDP/lkmpg/2.4/html/lkmpg.html
> > >
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|